Top-rated floor polishers.

Get matched with top floor polishers in Lutcher, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Lutcher, LA?

Select your specific project to find the pro for you.

Find Floor polishers in Lutcher

Showing 1-10 of 37
Floor Polishers questions, answered by experts

If your floor is still sticky after mopping, chances are you used too much or too little of the cleaning solution. Using too little won’t get all of the grime off, but using too much can leave its own residue. Refer to the cleaning solution’s instructions and dilute it as directed.

A floor polisher won’t remove scratches from a wood floor, but the polish can fill in surface scratches and make them all but invisible. If you run your fingernail gently over the scratch and it doesn’t catch, chances are that the polish will hide it. If it does catch, you might want to have your floors fully refinished, and you might need to have a professional floor sander in for particularly deep scratches. When in doubt, call a professional floor polisher to determine if polish will fill in your scratches or if you need more in-depth services.

While it is not recommended, you can mix Bon Ami with vinegar for a more powerful cleaning mixture. However, you should avoid mixing other types of powder cleaners, such as Comet and Ajax, with vinegar or with each other, as the reaction often creates a toxic gas that’s dangerous to the human body.

Yes, you can polish an existing concrete floor—as long as the slab is structurally sound and in good shape. In fact, that’s what makes this type of flooring upgrade so appealing. Polishing works best on bare concrete with minimal surface damage, although you can usually repair cracks and stains before the grinding and buffing begins. Instead of ripping out your existing concrete floor, polishing it can turn it into a high-shine showpiece that’s both practical and sleek.

The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.

The Lutcher, LA homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.