Get matched with top bathtub restoration pros in Ferriday, LA

A chipped bathtub could leak over time if you don’t take care of the issue. A tiny chip isn’t a big deal but may eventually grow into a larger crack. As the months go by, the tub’s barrier against moisture becomes weakened, making it prone to leaking. Large chips can also cause the tub to rust and even crack in half.

Before you begin caulking a shower, you’ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to get rid of the mold, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter’s tape—one above the joint where you’re caulking and another below it.

When buying caulk, look for ones labeled for tub and tile. These have either acrylic latex or silicone compounds. This allows the caulk to stick to smooth surfaces and prevent mildew from forming. 

Bathtub refinishing costs an average of $460 and includes removing the finish, sanding or acid etching the surface, priming it, and applying an epoxy coating. After the coating cures, the bathtub should look as good as new, and the finish should last between seven and 10 years. Because bathtub refinishing requires hazardous chemicals, you should call a bathtub refinisher to do the job.