Best bathtub restoration pros near Bude, MS

There are a few signs, both obvious and not so obvious, that it's time to refinish your bathtub. While some of these signs aren't an urgent problem, others could lead to significant damage if left untreated. Signs you should look out for include:

• Rust stains, which signal the tub's enamel or surface sealer is deteriorating 

• Small chips, which can grow into larger chunks and can lead to rusting

• Discoloration, which doesn't lead to a more significant problem but can be unsightly 

• Dirty surfaces, which means that the tub glaze is breaking down and allowing dirt to seep below the coating

While they’re heavier than their counterparts, cast-iron tubs are very simple to maintain. They have no seams and are durable, making them the easiest tub to maintain. While fiberglass and acrylic tubs are also relatively simple to maintain, they often have seams, making maintenance a little more difficult.

While tubs are fairly sturdy, you may notice cracks or holes. This kind of damage can happen from someone accidentally dropping something heavy into the tub. You might also see damage if you drop something heavy into the tub over and over again (like your extra large bottle of body wash). While you might only notice a small dent at first, this can later turn into a crack or a hole.

Also, certain cleaners that are harmful to your tub can cause damage. And if you have a fiberglass tub, you might see cracks if it was not installed properly with the right support.

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.