Get matched with top french drain pros in Central, LA

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

No. You should dispose of all oil-based finishing products through a local hazardous waste program. Not only can oil-based finishes be hazardous for the environment if disposed of in the sink, but they can cause clogs in your pipes and stop up your drains. Most municipal garbage or waste disposal companies have a specific location or pick-up schedule for hazardous materials, so that’s your best bet to get rid of excess finishing products.

While you don’t have to run out and immediately buy a new toilet at the first sign of a clog, if the toilet keeps clogging because it’s a low-flow or poorly designed model, a new toilet may be the way to go. If your toilet keeps clogging, you can try using less toilet paper, adjusting the fill valve, checking the toilet vent pipe on the roof, and using a toilet auger to make sure nothing is stuck in the pipe or trap.

In some cases, operating a snake can damage your drain and pipes. This depends on the overall condition of your pipes and how gently you operate the auger. For instance, older galvanized pipes covered in zinc are susceptible to scratches when using a drain snake. Additionally, it’s common for newbies to apply too much force when extending the snake, leading to scratches and related damage. You can also crack the porcelain with an electric auger if you’re snaking a toilet drain. If you’re using a manual snake or auger, the risk is minimal.