Get matched with top toilet pros in Bush, LA

The average cost to hire a plumber is typically between $45 and $200 per hour, with a common average rate around $125 per hour. This cost can vary based on your location, the plumber's experience, and the complexity of the job. Rates are often broken down by experience level: an apprentice may charge $45 to $90 an hour, a journeyman $60 to $110 an hour, and a master plumber $80 to $200 an hour. While hourly rates are standard, some plumbers may charge a flat fee for routine projects or offer project-based pricing. It's also common for plumbers to charge a minimum service or trip fee. For reference, some typical flat-rate costs for common jobs include: drain unclogging ($220), leaky faucet repair ($270), burst pipe repair ($400), toilet repair ($300), and water heater repair ($600). Note that these rates are for standard service hours; emergency, holiday, and after-hours calls will cost significantly more.

If your toilet is still leaking after replacing the toilet flapper, then you may not have installed the toilet flapper correctly. Double-check that you have placed the flapper over the overflow tube correctly, and check the flapper chain is at the right length. If your toilet is still leaking, then you may have another problem on hand. For example, you may need to replace the toilet wax ring or replace the toilet fill valve if your toilet is wobbly and leaking from around the base.

Yes, a bathroom remodel is a worthwhile home improvement project that typically adds value to your home, offering a return on investment (ROI) between 60% and 70%. Potential buyers look closely at bathrooms and kitchens, as these are often the most expensive rooms to renovate. A modern, updated bathroom is more appealing and assures buyers that the plumbing, fixtures, and flooring have a long, useful life ahead. Beyond the financial return, a remodel can also greatly increase your day-to-day satisfaction by creating a more inviting, spa-like space. Even a basic refresh with new paint and accessories can make a significant difference.

While you shouldn’t increase the flow of your low-flow toilet by adjusting the water level in the toilet bowl set by the manufacturer, you can make the flow as efficient as possible by ensuring the rim jets under the rim are unobstructed. To do this, use a mirror to look under the rim and scrub them with a toothbrush or a small wire to clear any debris stuck in the holes. You can also watch for leaks, make sure the internal components are in good shape, and replace them if necessary.