Get matched with top siding pros in Saint John, IN

To clean painted aluminum siding, use a mixture of mild detergent and water applied with a soft brush or sponge. Rinse thoroughly with a garden hose to remove soap residue. For stubborn stains, cleaning aluminum siding with a power washer on a low-pressure setting can be effective. But avoid using high pressure, which could damage the paint.

Some homeowners use caulk on the edges of clapboard siding to help seal it. However, this method invites new problems. With so many gaps sealed, clapboard siding is often unable to drain properly and moisture from rain or other sources can build up inside. This can lead to rot and other issues over time. When repairing clapboards, it’s best to avoid caulking the final product. The exception is trim around windows and doors, which should be caulked to avoid moisture problems.

Clapboard siding is traditionally made of wood, and is one of the most common types of wood siding in North America. When people talk about wood siding, they are usually talking about clapboard siding. However, not all wood siding is in the clapboard style: It can be tongue-and-groove, shake, and other designs. Also, clapboard siding can sometimes be made of different materials, like vinyl or fiber cement, so the terms are not interchangeable.

You should plan to stain or refinish your home's cedar siding every three to seven years to maintain its appearance and provide maximum protection, though some estimates suggest a range of four to six years. The exact frequency depends on several factors, including your local climate, exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the overall condition and quality of the wood.

For homes in harsh climates with high humidity and significant sun exposure, you should plan on staining as often as every three years, while those in milder locations may only need to do so every seven years. For the longest-lasting protection in particularly harsh climates, consider using an opaque stain.

If you are looking for a lower-maintenance alternative, you might consider vinyl or aluminum siding. While the initial installation cost can be higher, they do not require as much upkeep and can offer more value over time, especially in areas with excessive rainfall or high humidity.