Get matched with top dock building and repair pros in Westmont, IL

"Great Guys and respectful Finished the project on time Will use them again "

"Quick and friendly."

"If I could leave less than 1 star I would. I was a return customer that needed a few fence posts replaced as they rotted out. The quote was very high but they had done a good job in the past. We asked them to check other posts as well to be sure and let us know which ones to replace. They proceeded to just replace all posts in the line while we were gone for 30 mins. At least 2 of the 3 posts were just fine and did not need to be replaced. They then charged over $800 for the additional three posts they added and refused to wait the 10 minutes until we arrived to take the invoice or deal with it. In addition they did not bother to check the remaining fence as we asked and failed to clean up. They left dirt and concrete everywhere. We then called the following Monday as this occurred on a Friday, asked them to come out to finish and dispute the bill. They did not come out as planned and then told us to make an appointment. That all their fees are fixed and each post starts at $350 for the first one and $275 for each one after. Never did they tell us this in the quote or prior to installing the posts. We are left with a mess to clean and paid exorbitant fees for terrible work. Stay away!"

"Very professional job. Their employee's were top notch. Called with arrival time and took the time to explain everything that they were going to do. When done they took the time to have us come out and inspect the work, and make sure we were happy. Will use this company from now on."

"Stan's did an excellent job communicating about this project and completing the work. They have a very professional office. They responded quickly to my request for a quote, work was scheduled and completed shortly thereafter. The work itself was great, I cannot even tell where they cut and replaced the posts that anchor the railing to the concrete."

"Excellent!!! It was a pleasure to work with Chris on the design and layout of the deck. He designed a superior layout for the deck boards and a railing system that surpassed what we had with the old deck. He designed two new staircases that met building codes (the old ones didn't). And he used CAD software to create multiple views of the deck to help us visualize the deck before the project commenced. Pricing for the deck was based on the CAD models, and the pricing was very fair (IMO). While we were working on the deck design and corresponding bid, our town (Wheaton) decided to install a new water main for our neighborhood. The city tore up the entire length of our street along with our driveway and front lawn. Chris was very accommodating in scheduling the project around the activity on the street. The crew that tore off the old deck and replaced it with the new boards and railings was awesome! Ian (the crew chief and master carpenter) really knew what he was doing. His crew was talented and very easy to work with. They were neat, cleaned up after themselves every day, and hauled the components of the old deck away throughout the duration of the project. Ian did a very solid job of preparing the deck framing for the new surface. He repaired sections of the framing that had rotted out, and re-aligned sections of the framing that were not built properly when the deck was originally built. This was very important to me: a deck surface needs to be installed on a solid and level frame. I wanted to install rubber water shields on the top edges of the framing to prevent future rot. Ian worked around my slow pace and gave me time to do that as he made progress on other areas of the deck. Finally, Ian upgraded the framing so that it would support these improvements: a 'picture frame' around the edges of the desk surface, a 'parting board' that improved the layout of the deck boards, and the new railing system. The new deck surface is awesome. Deck Solutions used "camo fasteners" to fasten the boards to the framing. There are no screws or nails on the surface of the deck. The fasteners are completely hidden. Ian's skill and professionalism in installing the surface matched that of the best finish carpenters that have worked at my house. It looks beautiful. The new railing system is perfect. Ian routed grooves in the upper rail of the railings to accommodate the wiring that I needed for the low voltage lighting. He drilled a hole through the center of one railing post so that the wiring could be run under the deck and then routed to the grooves. (that is not easy to do with a four foot post!) And he drilled pockets into the rest of the railing posts that I could use for stuffing the wires and wire nuts that would be associated with each of my lights. A week after the deck was installed, Deck Solutions came back to apply a coat of stain to everything. I really like the material they use. It is a transparent, oil-based stain that soaks into the wood. It does not create a layer of finish on top of the wood. We had a choice of 5 or 6 different colors. The man who applied the stain was very meticulous in his work. It looks great. NET-NET: I know that this is a very long review. But I felt it necessary to describe the details of the work that was done so you can appreciate the quality of the work. My wife and I are both very pleased with the new deck. And we will be using Deck Solutions each year to clean and apply a new coat of stain to the deck. One last thought: Chris is very knowledgeable about the various technologies and materials available for building decks. We asked him to quote the cost of replacing the deck that is off of our second floor. Chris examined the situation and recommended a solution of deck panels and support pedestals that would rest on the flat roof of the house that is below that deck. He designed the layout of that deck and its supporting infrastructure and gave us a bid for the cost of replacing that deck. But he also suggested that the deck system was simple to install and that I could probably do it myself. He gave me his CAD drawings for the design. I decided that I will be installing that myself next year. I was very impressed that Chris offered me that very cost effective option and actually made it easy for me to proceed on my own using his design and CAD drawings."

"Aldana & Son did excellent work rebuilding my back stairs. I needed the job done on a quick timeline and they were able to accommodate that. Javan Aldana was very professional and easy to deal with. I was very happy with the finished product and would definitely use them again."