Top-rated septic tank pros.

Best septic tank pros near Mounds, IL

Enter your zip and get matched with up to 5 pros

Need a pro for your septic tank service project in Mounds, IL?

Select your specific project to find the pro for you.

Top-Rated Septic tank pros in Mounds - Updated Nov 2026

Septic Tanks FAQs, answered by experts

With proper maintenance, most types of septic systems—including mound, evapotranspiration, and constructed wetland systems—can last up to 40 years. To keep your system running as long as possible, follow basic septic tank upkeep guidelines, like pumping your septic tank every three to five years and only flushing human waste and toilet paper.

Frozen well pipes make themselves known quickly, as your faucets slow down to a trickle or shut down completely. If you notice a serious reduction in flow in the winter from toilets, showers, kitchen faucets, and other plumbing fixtures, a frozen pipe or two is to blame. Another tell-tale sign is frost or ice on exposed pipes outside. 

A septic tank is an underground container that collects and holds wastewater until it’s sufficiently filtered and broken down. It treats wastewater by separating waste so the leftover liquid can travel into the drainfield where the soil and gravel eventually filter and purify it. This process naturally eliminates bacteria, viruses, and other contaminants.

Your septic tank naturally contains the good bacteria it needs, so you typically don't have to add more as the system produces them on its own. However, if you wish to replenish the bacteria, you can use natural methods. For example, you can add three rotten tomatoes to your garbage disposal or flush 1/4 ounce of active yeast down the toilet every three months. While store-bought septic enzymes and chemicals are available, many additives are unnecessary and may even harm your system. The most effective way to maintain a healthy bacterial balance is to avoid using chemical drain cleaners, which can kill the beneficial bacteria in your tank.

How do you set your well’s pressure tank? All you need to do is first drain the tank of water and find the pressure switch. Remove the switch cover and adjust the switch with a wrench—clockwise to increase water pressure, and counter-clockwise to reduce it. Each complete turn of the nut on the switch should equal 2.5 psi. Once this is done, replace the switch cover. All that’s left is to adjust the pressure of the tank itself using an air compressor and a tire gauge to support the new setting.

The Mounds, IL homeowners’ guide to septic tank services

From average costs to expert advice, get all the answers you need to get your job done.