Get matched with top roofers in Notus, ID

No, there’s no specific building code that requires a roof overhang. However, installing your roof with the standard 2-inch overhang is good practice, as it helps direct runoff away from your fascia boards and roof decking and into your gutters. Some overhang is especially important in areas that see heavy rainfall and snowfall, as the risk of water getting under the roofing material and causing water damage is much higher.

A well-maintained tile roof can last anywhere from 40 to over 100 years, with its exact lifespan depending on the material and level of care. Proper maintenance, which includes keeping the roof clean, free of debris, and performing routine repairs for any cracked tiles, is crucial for longevity. The lifespan varies significantly by tile type:

• Clay, terracotta, and slate tiles are highly durable and can last over 100 years.

• Concrete tiles typically last from 30 to 100 years.

• Metal tile roofs generally last between 40 and 70 years.

• Composite tile roofs have a lifespan of 20 to 50 years.

Be aware that maintenance for a tile roof can sometimes be more expensive than for an asphalt roof.

There are two main types of roofing shingles: 3-tab and architectural. Architectural shingles cost more than 3-tab but offer a more unique look and can last longer. However, 3-tab shingles are lightweight and affordable, and many people use them for both patching roofs and installing new roofs. Ultimately, the best type for you depends on your budget and your home’s aesthetic.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.