Get matched with top masons in Chesterfield, ID

For most brick cleaning jobs, including fireplace bricks, use a masonry sponge and a gentle cleaner. A simple solution of equal parts water and vinegar, or a few drops of dish soap in a bowl of water, can effectively remove grime. For tougher stains, you can use a dedicated masonry or fireplace cleaner. It is crucial to wet the bricks thoroughly with water before applying any cleaning solution to prevent the brick from absorbing it, and to rinse the surface completely afterward. Harsher cleaners containing bleach or ammonia should only be used as a last resort, and they should never be mixed together.

Cobblestone can be made from many different types of stones but the most common ones, by far, are granite, basalt, limestone, and sandstone.  If you are laying a brick paver patio or other such project, the medium is different. It’s rare, but cobblestone can also be made from marble, slate, jasper, and other types of rock. Technically, you can make cobblestone from almost any type of rock, but if it is weather-resistant and stands the test of time is another question entirely.

When painting brick, each application method has pros and cons. Spraying is much faster but may not penetrate the porous surface of the bricks. Rolling is effective for getting paint into the bricks but doesn't work as well on the mortar. Brushing is very time-consuming and also won't penetrate beyond the surface. For the best results, a combination of spraying and rolling is often recommended. If you use a roller, choose a thick option (at least a half-inch) and ensure the paint gets into all the crevices for even coverage.

Yes, you can limewash surfaces other than brick. Plaster, stone, stucco, and concrete can all also be limewashed. Any porous surface that will absorb the wash is a good candidate for limewash, although it won’t help much with waterproofing. If you choose to limewash over paint, you’ll need to prep before applying it to avoid a powdery, chalky finish. Shiny surfaces like metal or glass can’t absorb limewash, so it’s not suited for these.