Get matched with top ceiling fan pros in New Hampton, IA

If the fan doesn’t have a switch, connect the white wire from the ceiling to the white wire from the fan; connect the green wire to the ground wire; connect both black wires; and connect both blue wires. If yours has a switch, the white and green wires are connected the same way. However, connect the ceiling’s red wire to the light’s black wire and the ceiling’s black wire to the fan’s black wire. 

It is relatively rare for a ceiling fan to fall. A properly installed ceiling fan is attached firmly to a ceiling joist. Even if the fan is wobbling, it’s unlikely to fall down. However, you should promptly repair your fan when you notice wobbling or imbalance just to be safe.

If you’re replacing an old fixture with a ceiling fan, you usually won’t need a permit, but if your electrician runs new wiring for the fixture, you likely will need a permit. Building permits are necessary in most municipalities if you’re making changes to your electrical system, so even if you have partial wiring run to the area and need new wiring installed for added functionality, you’ll probably need a permit. Your electrician should be able to let you know if you need one, and they’ll typically file the paperwork for you.

Yes, you can install a ceiling fan where there is already a light fixture. The electrical wiring needed to install a ceiling fan is similar to that of a light fixture. Before you make the swap, consider whether you need an extension rod and whether your ceiling is on an angle. You will need a fan-rated electrical box to ensure that your ceiling is sturdy enough to handle a spinning fan.