Best fencing pros near Lake Mills, IA

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust. 

When deciding between fence post foam and concrete, the best choice depends on your specific needs and priorities. Concrete is generally considered stronger and more durable, making it the preferred option for heavy, load-bearing posts. However, expanding foam offers several advantages, such as being more eco-friendly and curing much faster. For smaller fences or those made with lighter materials like vinyl or wire mesh, post foam is a good alternative. While concrete is more affordable, it is also harder to work with and has a longer curing time.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

It’s usually cheaper to buy pre-made fence panels than to build your own. This surprises many people since DIY tasks so often save money. However, large stores don’t have to pay the same amount per board of wood that homeowners do, allowing them to sell pre-made panels at a more cost-effective rate. Pre-made panels also save a great deal of time, energy, and guesswork. The drawback is that they are harder to customize to the shape and slope of your yard.