Get matched with top drywall pros in Corning, IA

Drywall insulation costs around $1,800, on average, but prices can range from $500 to $4,500, depending on a few different factors. The following things are important considerations to make when pricing out your insulation project:

• Square footage of insulation

• Type of insulation 

• Climate in your area and the insulation R-value required

• Whether or not your walls are already finished

• Accessibility of the area 

• Whether or not you need old insulation removed first

The easiest way to cut holes in drywall for electrical boxes is to use a spiral saw with a drywall router bit. Hang the drywall without cutting out a hole for the box, but make sure you measure and mark where the box is located on the wall. Once you screw in the drywall sheet, drill a small hole into the box void, insert the spiral saw bit, and move it around the edge of the box using the inside wall as a guide. You can also use an oscillating multi-tool with an electrical box cutout for fast, professional results.

Installing drywall will cost between $1.50 and $3 per square foot for materials, labor, and finishing, which is quite a bit lower than the average of $9 to $13 per square foot for a drop-tile ceiling. So, while drop ceilings allow more design flexibility, provide easy access to utility lines above them, and are often much easier and less expensive to repair, they do cost more upfront. You can minimize your drop ceiling cost by opting for more affordable fiberboard panels, although some homeowners don’t like the look of this material.

You should do a little bit of sanding between adding coats of mud. Knock down any ridges or significantly imperfect areas through sanding, which should help you apply the next coat of mud smoothly. If your first coat of mud is pretty smooth after it dries, a quick sanding is all you’ll need. Don’t forget to wipe away any dust after each sanding process.