Best backsplash installation pros near Dawsonville, GA

Yes, you can install a backsplash directly onto drywall, provided the wall is properly prepped, clean, and dry. For best results, especially in kitchen areas, your walls should be made of moisture-resistant drywall, often called green board. If your current wall isn't moisture-resistant, it's recommended to replace it before installing the backsplash. For even greater protection against water damage, you can remove the existing drywall and install a tile backer board or cement board instead. While properly installed standard drywall is typically strong enough to support a backsplash, some local building codes may require water-resistant materials in kitchen areas, so it's a good idea to check.

Uniform spacing between tiles is important for a professional and clean appearance. To achieve this spacing, tile spacers should be placed between the tiles and left in place until the mortar hardens and the tiles are secure. You can use X-shaped spacers vertically in between the tiles and laid flat at the corners.

Yes, unfortunately, it is normal for wall and floor tiles to crack, especially when you drop heavy items on tiled floors or place heavy objects on them. Tiles are also more susceptible to cracking when ceramic tiles designed for walls are installed on floors, as these are often not strong enough to handle heavy loads from foot traffic and furniture. Similarly, tiles that are installed incorrectly, lack adequate subflooring, or have other installation problems are prone to cracking. To avoid these problems and the inevitable repair and replacement costs they bring, always hire a professional for tile work and follow best practices for installation.

The tile trim you use will depend on a few factors, including design preferences, budget, and whether the project is DIY or not. You might choose plastic trim if you want an easier DIY job that is more budget-friendly. There are also more color options available in plastic. On the other hand, you might choose metal to match your fixtures or for areas with heavy use.