Get matched with top pool and spa technicians in Riverview, FL

No. In fact, some owners prefer to “summerize” their hot tubs and use them primarily over winter to enjoy the contrast of cold and hot water. It’s possible to keep the tub filled and running year-round, and some pros may even recommend this method compared to the work and risks of a full winterization every year.

However, keeping the hot tub running will require additional resources. You’ll use more power and more chemicals to keep it in good shape. Weigh the pros and cons of your situation before making a decision.

Biofilm growth can cause a hot tub to feel slimy. Hot tub biofilm is a slimy substance that’s typically due to natural contaminants like makeup, soaps, skin oils, deodorants, or lotions. A hot tub can also have a slimy interior or slimy water if the tub’s filters are old or damaged, or if the hot tub isn’t properly cleaned. You should drain your hot tub, wipe away any slimy residue, then refill the water and use a spa purge product that prevents the buildup of biofilm.

Yes, hot tubs can use a significant amount of electricity, primarily to keep the water heated. A typical hot tub uses between 1,500 and 6,000 watts, and the pump can add another 1,500 watts. This usage can result in a monthly cost of around $20 to $30. The exact amount of electricity consumed depends on several factors, including the hot tub's age, size, heater voltage (120V vs. 240V), usage habits, and thermostat setting. Newer, energy-efficient models generally use less power than older ones. To reduce electricity costs, consider investing in an energy-efficient model, using a quality insulated cover with a thermal blanket, and keeping the filters clean.

To refill a hot tub after winter, start by opening up the tub and giving it a quick cleaning. If you use antifreeze, drain out the water then grab a hose and thoroughly clean the tub shell out, spraying water into each jet of the tub. 

Reconnect the hot tub and turn the power back on. When it’s time to fill the tub again, insert the hose into the filter well (if available). Avoid trapping too much air in the water lines, which can cause the pump to lock up when it starts again. Add the necessary chemicals and start the heating process. It will take some time—most of a full day—for the water to heat up again.