Get matched with top driveway gate pros in Reddick, FL

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

There is a reason many commercial garages and storage facilities have roller garage doors. They stand out as one of the most secure options due to their unique design. The compact installation and absence of visible leverage points on the sturdy aluminum curtain make them a formidable obstacle for potential intruders. 

Your gate should be 3/4 to an inch smaller than the opening. The opening size that you need for your gate can vary depending on your hinge type. You may also need to add reinforcing braces if the gap between your gate and the fence is not uniform from top to bottom.