Top-rated lead testing and removal specialists.

Get matched with top lead testing and removal specialists in Bunnell, FL

Enter your zip and get matched with up to 5 pros

Need a pro for your lead testing and removal project in Bunnell, FL?

Select your specific project to find the pro for you.

Find Lead testing and removal specialists in Bunnell

Bill Wilson Inspections Facebook
New to Angi

Serving Bunnell, FL and surrounding areas

In business since 1977

Free estimates

Credit card accepted

The EPA Renovation, Repair, and Painting Final Rule (RRP Rule) requires that on a home built before 1978, if you disturb more than 20 sq ft of exterior paint or more than 6 sq ft in any interior room the disturbed painted surfaces must be checked for lead based paint. This law affects remodelers, painters, plumbers, roofers, window replacers, kitchen cabinet replacers, or any trade that disturbs paint while working.\n\nAt Lead Paint Solutions, LLC, we use a state of the art, nondestructive XRF analyzer to not only identify lead paint, but also measure the volume of lead in the paint. EPA defines lead paint as paint that has 5% lead by weight or 1 milligram per square centimeter. Knowing the exact amount of lead in your paint and comparing it to the EPA allowable amount, rather than simply saying �it has lead in it� will oftentimes determine that there is not enough lead in the paint to trigger expensive lead safe construction practices. Contact Lead Paint Solutions, LLC, today!

Lead Testing and Removal questions, answered by experts

DIY kits are available for basic air quality testing, but professional services provide more comprehensive results and recommendations. While a DIY kit may seem cost-effective, a professional assessment is more thorough. Inspectors are better equipped to catch all pollutants and hazards, and you'll still need a professional to verify and act on DIY test results. Furthermore, some kits don't test for certain pollutants or only detect their presence without measuring specific levels (like mold spores). It's generally better to opt for a detailed professional assessment.

Several different measurements may be used to determine the amount of lead in water. The most common unit of measurement is micrograms per liter (µg/L), which is the same as parts per billion. Another measurement is milligrams per liter (mg/L), which is the same as parts per million.

You can paint over lead paint, or “encapsulate” it with a special paint that includes an ingredient called an encapsulant. The EPA approves encapsulation as a lead paint removal method as long as the paint remains undisturbed. Standard types of paint without an “encapsulant” from the big box stores or hardware stores do not meet EPA standards for remediation of lead-based paint.

Some causes of brown well water—like excess tannins or dissolved iron—don’t pose a health risk. In other cases, harmful bacteria might be the culprit. If your well water has suddenly turned brown, it’s a good idea to use a home water test kit to get a better sense of what’s going on with your water. Consider calling a professional for an expert opinion before drinking the water and hoping for the best.

Lead exposure poses serious health risks, particularly for children, and can be present in paint, pipes, and soil.

The Bunnell, FL homeowners’ guide to lead testing and removal services

From average costs to expert advice, get all the answers you need to get your job done.