Top-rated drywall insulation pros.

Best drywall insulation pros near Milford, DE

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Milford, DE?

Select your specific project to find the pro for you.

TRUSTED BY MILFORD, DE HOMEOWNERS

  • Average homeowner rating star icon4.4
    Average homeowner rating
  • Verified reviews icon123
    Verified drywall insulation services reviews

Top-Rated Drywall insulation pros in Milford - Updated Nov 2026

Avatar for MSJ Attic Insulation
MSJ Attic Insulation
5.0(
7
)
Blown-In Insulation - Install or Upgrade

Serving Milford, DE and surrounding areas

Approved

In business since 2021

Free estimates

Emergency services offered

"Did a great job on the insulation however they left a hole in the ceiling when they dropped something on the attic floor. Not a big deal but they need to be careful. Overall, amazing work they do all kinds of insulation and they also install radiant barriers on roof joists. They are reasonably priced and the crew is super friendly, pleasure to work with."
Business card
Poorly insulated
Poorly insulated
In progress
Radaint barrier

+6

43 neighbors recently requested a quote
Avatar for Dixie's Insulation, LLC
Dixie's Insulation, LLC
4.5(
49
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Milford, DE and surrounding areas

Approved

In business since 2006

Free estimates

Small jobs welcome

"The owner of Dixie Company was very knowledgeable and helpful! He came with the work crew and seen that everything was done with the highest quality! I highly recommend this company! They have great workers and the owner has integrity and with honest prices! Thanks again Dixie Company and Home Advisors with Angi! In the future if we need insulation I will be sure to call Dixie Company!"
Installing Insulation and Poly in a crawlspace
Installing Insulation and Poly in a crawlspace
Crawlspace Job
Batts insulation
Batts insulation

+7

Response time3 days
32 neighbors recently requested a quote
Recommended by97%of homeowners
Avatar for RetroFoam of Philadelphia
RetroFoam of Philadelphia
5.0(
22
)
Injection Insulation - Install

Serving Milford, DE and surrounding areas

Approved (Corporate)

In business since 2023

Free estimates

Warranties offered

"We are extremely satisfied with the whole process of our house being insulated. First we had the walls done, and then a couple weeks later we had our attic insulated. The crew were so nice, friendly, and knowledgeable. We are very satisfied with everything. Thank you, everyone."
RetroFoam Wall Insulation
Installing RetroFoam
RetroFoam with Siding
RetroFoam with Brick
Response time1 day
Response rate100%
135 neighbors recently requested a quote
Avatar for Home Genius Exteriors
Home Genius Exteriors
4.9(
517
)
Blown-In Insulation - Install or Upgrade

Serving Milford, DE and surrounding areas

Approved

In business since 2004

Free estimates

Credit card accepted

"Home genius Exteriors did as great job on my siding the crew answered all my concerns when asked. The crew efficient and very nice. Joseph was good as well very communicative. Overall happy with the service."
Windows
Windows
Windows
Windows
Windows

+69

49 neighbors recently requested a quote
Recommended by49%of homeowners
Avatar for Lawson Home Services, LLC
Lawson Home Services, LLC
4.6(
60
)
Blown-In Insulation - Install or Upgrade

Serving Milford, DE and surrounding areas

Approved

In business since 2010

Free estimates

Emergency services offered

"Donnie was the person who did the work -cleaning out our dryer vent using a camera to record the inside of the vent the entire vent was completely clog with lint, and after the wok was done, it was completely empty the work was very reasonable priced. I highly recommend Lawson Home Services"
Metal Door Crawlspace Entrace
Turtl Crawlspace Entrance
Attic Air Leaks
Attic Air Sealing
Garage Loft Ready for Sprayfoam

+137

Response time9 hrs
151 neighbors recently requested a quote
Recommended by92%of homeowners
Avatar for MJ Home Services LLC
MJ Home Services LLC
4.0(
361
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Milford, DE and surrounding areas

In business since 2008

Free estimates

Emergency services offered

"Wonderful. There are few things worse than going down to your basement and finding muddy water pooled on the floor. We were able to take care of the standing water; however, we had to find the source of the leak. We called MJ Home and they were able to come out the same day, give an assessment, and by that evening we had an estimate. Another representative came out the following day to meet with my husband and discuss the exact plan of attack and the following day they were out there and the job was completed. I would not have asked for better service."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+9

Recommended by75%of homeowners
Showing 1-10 of 28
Drywall Insulation FAQs, answered by experts

The time it takes for thinset to dry is determined by your room’s ambient temperature and humidity levels. Assuming the average humidity level is around 40% with an average temperature of 70 degrees Fahrenheit, thinset can dry within 48 hours. Lower temperatures and higher humidity can extend the curing process beyond 72 hours, while high heat and zero humidity can shorten the curing process. However, thinset can crack if it dries too fast.

The age of your home can clue you in to whether you have plaster or drywall ceilings. Homes built after the ‘70s are more likely to have drywall ceilings and walls, while older homes have plaster. You can also do the pushpin test: A pushpin will go into drywall, whereas it’s much harder to push one into a plaster wall. If you’re still unsure, ask a drywall professional to let you know which type of ceilings and walls you have.

Drying alone can take 1 to 4 hours to dry to the touch per plaster layer, but some types of plaster take several hours longer to dry. However, this doesn’t mean the job is done because plaster doesn’t fully harden until it cures, which can take a few days to a couple of weeks. It may take even longer if you’re building a new, pretty thick plaster wall. Allow the plaster to cure before painting it.

You can take a few steps to save money on drywall installation, even when hiring a professional to do the bulk of the work for you. These ideas include the following:

  • Buy the drywall and other materials yourself to avoid product markup and delivery fees

  • Ask about discounts if you use the same company to tape, spackle, and paint

  • Hire drywall professionals in the winter when demand is the lowest

  • DIY as many parts of the project as possible, like replacing insulation and painting

Whether you can reuse a drywall anchor depends on its type, material, and how it is removed. Plastic anchors, such as expansion or self-drilling types, are generally considered single-use because they are designed to expand and are likely to break or become deformed upon removal. Metal anchors, like toggle bolts, are more durable and can often be reused if they are not damaged during extraction. However, with toggle bolts, the toggle mechanism can fall inside the wall when the bolt is removed, making it difficult to retrieve. If an anchor is damaged or must be cut for removal, it cannot be reused regardless of its material.

The Milford, DE homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.