Get matched with top fencing pros in Bantam, CT

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

Ideally, when you replace a fence post, you should also replace the concrete footing. The concrete bonds to your new post, creating a secure base. If you install a new post into old concrete, it won’t be as sturdy.

That said, it is possible. Sometimes the post will lift right out of the concrete. If not, you can use a high-lift car jack to try and lift the pole out of the footing. Put the new post into the same hole and backfill it with fast-setting concrete. Keep in mind, this won’t work well for metal posts.

Pallet fences come with built-in support through the fence posts you should install on each side of their vertical interior. Stand the fence upright and slide it onto the fence posts, then further support it with 2x4 wood boards that you drill across each point where two pallets connect side-by-side.

You can't build a fence against your neighbor's fence if it touches or is attached to it unless you get explicit permission from your neighbor. Most municipalities recommend building a fence about two feet away from your neighbor's fence to allow access for fence repair and mowing.