Get matched with top fire pit installation pros in Milliken, CO

A hot fire alone will not remove significant creosote buildup and can be dangerous, as it risks causing a chimney fire. While the warmth from a fire can help loosen stuck tar, making treatments like creosote logs more effective, it is not a substitute for proper cleaning. For existing creosote, the safest and most effective method is to have your chimney professionally cleaned by a chimney sweep.

No, you can’t completely fireproof a house. There is always a chance that a fire can break out inside or outside your home. Even if most of the home is built with fireproof materials, a long-burning fire can still cause damage. Still, fireproofing efforts can buy you additional time to evacuate and give you a better chance of salvaging your home after a fire rather than needing to rebuild entirely.

If a light switch is off, it’s very unlikely to cause a fire. For a fire to start, the switch has to be on, activating an electrical current, and the wiring must be faulty. However, the malfunctioning light switch could cause an intermittent current to move across the electrical wire. This issue could become a fire hazard with another device connected to the wire. You should replace the bad light switch as soon as you notice it or call an electrician.

Yes, fire extinguishers eventually expire. However, the good news is that a properly stored fire extinguisher can last a decade or longer. They don’t have an expiration date on the canister, but you can check the manufacturing date on the “UL” nameplate near the classification information. Maintenance will also give your fire extinguisher longevity. Check the gauge at the top of the extinguisher every month. You'll want to make sure the gauge needle is in the green section, and if a hose or nozzle has been used or damaged, you need to replace it.