Get matched with top roofers in Hesperus, CO

A chimney cap costs about $300 on average to install, with prices ranging from $75 to $1,000. The final cost depends on several factors, including the professional you hire, the accessibility of your chimney, the cap's material and size, whether any repairs are needed, and if it requires custom fabrication. Chimney caps are usually made from galvanized steel, stainless steel, or copper. Copper caps are the most expensive, followed by stainless steel and then galvanized steel. Excluding labor, average material costs are around $100 for galvanized steel, $250 for stainless steel, and $600 for copper. You may also face additional costs, such as hiring a chimney sweep to clean the chimney before the cap is installed.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Yes, gable vents can let water in. That being said, this usually only occurs during extreme conditions like heavy rainfall. You can prevent water from entering through gable vents by adding a screen that traps the water before it can enter.

Skipping the installation of a drip edge or gutter apron can lead to significant water damage. Without this component, water is more likely to seep under roofing materials or leak behind gutters, damaging the fascia, soffits, siding, and even the interior of your home, such as the attic. Over time, this moisture can cause rot, mold, and deterioration. In colder climates, a missing drip edge also increases the risk of ice dams, which can lead to expensive repairs. A drip edge is an essential part of a roof's drainage system, and some local building codes may even require its installation to protect the home from water damage.