Get matched with top roofers in Towaoc, CO

Roof underlayment usually lasts as long as the roofing material that covers it, as it’s not directly exposed to the elements. In most cases, roofing companies will replace the underlayment each time they install a new roof. In some cases, particularly with slate, clay, or certain metal roofs that can last 50 to 100 years, your underlayment may require replacement within that timeframe, especially if you start to notice roof leaks.

No, a metal roof will not make your house hot. In fact, metal roofs help keep your home cooler by reflecting heat instead of absorbing and transmitting it inside. Metal also has high thermal conductivity, which means it gains and loses heat quickly. While the sun may heat the metal, the roof rapidly transfers that heat back into the air rather than retaining it. This reflective property can lead to energy cost savings of up to 40%, as your cooling system won't need to work as hard to maintain a consistent indoor temperature.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

EPDM roofs have a few common problems, most of which can be resolved with regular maintenance. This type of roofing is laid down in sheets with seams, which can be a starting point for leaks. Proper installation and roof sealing can often avoid seam issues. 

The material is also susceptible to tears and punctures from falling branches or other sharp objects. There are black and white versions of EPDM, and the black version is more prone to fade and succumb to UV damage. Regular roof inspections can protect the costs of rubber roof installation and extend the life of your roof.