Get matched with top affordable plumbers in Bow Mar, CO

The water in your toilet tank refills after each flush. So if you see dirty water in the bowl, you should check the tank to see if it’s coming from there. A dirty toilet tank can be the result of sediment in the water itself—-after all, the water will sit in the tank between flushes and can cause the interior to change into a dingy color. Faulty toilet components, like an old flapper, corroded tank lever or chain, or damaged seals, can also lead to dirty water as the materials break down inside the tank. You can clean the toilet tank or change out the old parts to give it a fresh start.

Prices for shower drain styles vary. For example, a linear shower drain costs about $200 or more for the part alone compared to about $15 for a circular shower drain. Also, linear shower drains typically require a shower remodel to use them, so you may pay a few hundred dollars more for labor. Read about the pros and cons of linear shower drains.

It is generally not recommended to pour hot or boiling water down a drain to unfreeze pipes due to significant risks. In some cases, the sudden temperature change can cause more ice buildup or produce steam, which increases pressure and could cause the pipe to burst, leading to costly damage and potential burn injuries. While hot water might help with a partially frozen drainpipe, it is unlikely to thaw a completely blocked water pipe further down the system. Additionally, boiling water can damage plastic pipes over time. Safer and more effective methods include using a space heater near the frozen section or applying hot towels directly to the pipe.

A sewage ejector pump is necessary if you have any plumbing fixtures, such as a bathroom, laundry room, or sink, located below the level of your home's main sewer line. Standard plumbing relies on gravity to drain wastewater and solid waste into the municipal sewer system or a septic tank. For fixtures below this level, like those in a basement, gravity cannot move the waste upward. The ejector pump provides the force needed to pump the sewage up to the main line. Without one, wastewater from below-ground fixtures would back up, potentially causing a sewage overflow and flooding. If all of your plumbing is on the main floor or higher, gravity is sufficient and an ejector pump is not needed.