Get matched with top welders in Woodside, CA

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: Can metal roofing be cut with a circular saw?

• <div><p>While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The <a href="https://www.angi.com/articles/experts-discuss-metal-roof-paint-benefits-cost.htm">cost to paint a metal roof</a> again to avoid this damage is typically an additional <b>$0.50 to $1 per square foot</b>.</p></div>

Q: How long does it take to cut up a hot tub?

• <div><p>Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.</p></div>

Q: How long does it take to ground a rod?

• <div><p>It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Woodside, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Woodside, CA

*The Angi rating for Welding companies in Woodside, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Woodside, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on February 20, 2026

Reviewed in February 2026
David arrived early and completed the repair within 15 minutes. He knew exactly what he was doing and had all the right tools to do the job. I would definitely recommend this company.
All Garage Doors
Request a quote
Reviewed in March 2025
We recently had MS remove our older wooden fence because of the new fire regulations and replace it with a black 5' chain-link swimming pool fence including three self-closing and self-latching gates. We had several other companies on this list come by to give bids and some only did wood fencing...
MS Construction and Services
Request a quote
Reviewed in October 2023
Juan called me immediately after i posted the need to make a swing in gate to an old wrought iron fence. Our home was built in 1950 and the wrought iron fence and driveway gate maybe was installed 20-25 years ago. Juan was able to meet me that morning and completed the job the very next day. ...
Decor Iron Works
Request a quote
Reviewed in March 2023
Enjoyed working with this contractor.
Penagos Painting
Request a quote
Reviewed in November 2022
Good welder if you can get an appointment.
Legendary Welding Inc
Request a quote
Reviewed in November 2021
As a repair job caused by flooding due to frozen pipes during the February freeze & rolling black-outs of electricity, the prep prior to installation was problematic. Leonard had to cut out some damaged planks of wood, scrap off old adhesive left on the cement floor after remediation, level the...
Home and RV Renovations
Request a quote
Reviewed in December 2020
Welded Sprinter Bench Seat Frame
Al the Welder
Request a quote
Reviewed in October 2018
Working with Everlast was a negative experience and I can't recommend them. My project was complex, involving full remodel of kitchen/bathroom/living room/laundry room, building a ground floor addition, removing a main structural wall, and replacing the back deck. We're home reno veterans so I...
Everlast Construction
Request a quote
Reviewed in February 2016
Workers and reps all very polite. Workers frequently quite late. Quality of materials used was low. Errors in installation. Ended up with pipe leak behind wall because of bad weld/soldering and it inflitrated ceiling below. Limited choices in finishing materials <br />
Dave's Remodeling Inc
Request a quote
Reviewed in October 2015
They are busy, so it took longer than I wanted for installation, but then I wanted it yesterday. The "pop-up" vent came with scroll metalwork my wife wasn't expecting. They disassembled and remove the unwanted part, welded a support member and painted the work. The finished work is very...
BAY AREA CANVAS & PATIO
Request a quote

Find Welders in Woodside

Double-L-Welding

5.0(

)

Serving Woodside, CA and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Warranties offered

"Great. The work was excellent and efficiently done. Great comunication through the project. Would highly recommend."

+22

Response time2 days

3 neighbors recently requested a quote

Recommended by71%of homeowners

Serving Woodside, CA and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"All went well and then some.
"

Recommended by100%of homeowners

Serving Woodside, CA and surrounding areas

In business since 2012

Free estimates

Offers commercial services

"Andres was prompt in responding and had excellent communication. He was thorough with the project and explained everything he was doing. Our gate works better than before and the repair looks great. Would highly recommend Andres."

Response time1 day

Recommended by100%of homeowners

Request Quote

William Handyman Service

5.0(

)

Serving Woodside, CA and surrounding areas

In business since 2022

Free estimates

Emergency services offered

"He and his crew were amazing. The job is well done, in a very timely manner, the cost was quite reasonable, the clean up was excellent. I will hire him again!!"

+24

Recommended by100%of homeowners

Serving Woodside, CA and surrounding areas

In business since 2017

Free estimates

"They are professional for my project, they were easy to communicate with. I will do business with them again."

Response time2 hrs

Recommended by100%of homeowners

Request Quote

Navarro's Welding & Fabrication

2.4(

)

Serving Woodside, CA and surrounding areas

In business since 2015

Free estimates

"no written agrement after asked many times for waranty"

decretive main gate with only outside exposed lock

+24

Response time1 day

Recommended by85%of homeowners

Serving Woodside, CA and surrounding areas

In business since 1986

"It was fantastic. He's been very honest with his design and timing. Very great partner."

Recommended by100%of homeowners

Request Quote

Bright craft

New to Angi

Serving Woodside, CA and surrounding areas

I have been welding since I was a young teen. I used it as a hobby to begin with and it slowly grew into a career. I can do any type of welding necessary and have always been successful in this trade. I love this trade I think that has a lot to do with it as well it's always been something that came easy to me.

Request Quote

Bay Area Welders

New to Angi

Serving Woodside, CA and surrounding areas

Emergency services offered

Credit card accepted

Specializing in all things Welding! We guarantee your satisfaction, and we won’t leave until the job is done right. Our team has quality experience in this industry, and we make sure our customers are happy before we leave. Call or click to schedule an estimate today!

Request Quote

Central Pacific Welding and Fabrication

New to Angi

Serving Woodside, CA and surrounding areas

In business since 2018

Free estimates

With many years of experience in the industry, we are the experts you need to take care of your business. We will treat your home as we would treat our own. Give Central Pacific Welding and Fabrication a call today. We look forward to working with you!

Response time2 hrs

Request Quote

Showing 1-10 of 22

Welding questions, answered by experts

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The cost to paint a metal roof again to avoid this damage is typically an additional $0.50 to $1 per square foot.

Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

The Woodside, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
May 30, 2026May 30, 2026
How Much Does a Wrought Iron Railing Cost? [2026 Data]
Discover how much a wrought iron railing costs. Get detailed price breakdowns, installation factors, and tips to save on your new railing project.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wrought Iron Fence Installer
Learn how to hire a wrought iron fence installer with confidence. Find qualified pros, ask the right questions, and get expert tips for your project.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.
Mizuki Hisaka
•
Apr 10, 2026Apr 10, 2026
How to Cut PVC Pipe: The 3 Most Common Methods
Learn how to cut PVC pipe with ease and efficiency. Our guide will show you how to tackle your PVC pipe project like a pro.