Top-rated welders.

Get matched with top welders in Thermal, CA

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Thermal, CA?

Select your specific project to find the pro for you.

Find Welders in Thermal

Avatar for Western Pacific Roofing Corp
Western Pacific Roofing Corp
4.8(
24
)

Serving Thermal, CA and surrounding areas

In business since 1949

Free estimates

Emergency services offered

"Excellent! I could not have asked for a better crew. JT, Shaun, Pedro and Kayla were my direct contacts and all were very professional. Western Pacific Roofing came to the rescue just before this last big rain. They were not prepared to repair my roof upon first observation, however, they were able to secure the exposed area so as not to allow further damage from the impending rain storms. We survived the rain, they returned the next business day after the rains. Roof is repaired and I’m completely satisfied with my overall experience. Western Pacific Roofing has become my go to company for all of my properties’ roofing needs..."
Additional Photos
Additional Photos
Additional Photos
Recommended by100%of homeowners
Avatar for Palm Steel Welding
Palm Steel Welding
5.0(
2
)

Serving Thermal, CA and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"Hiring Palm steel welding was a great experience.The environment was professional, and Walter's expertise made it easy to get what i was looking for. I was very happy with his attention to detail.His commitment to quality work is evident. I will keep Palm steel welding in mind for future welding services reviewed by Marilyn"
Response time30 mins
Avatar for One Water Systems
One Water Systems
4.7(
49
)

Serving Thermal, CA and surrounding areas

In business since 2006

Free estimates

Emergency services offered

""One Water" employees are professional and courteous. System was installed in a few hours. It's been 2 weeks since we got the unit installed and we are happy with the quality of water that we are now able to get from every faucet in the house."
April 2013 Install
April 2013 Install
Valley Center Install
Additional Photos
Additional Photos

+11

Recommended by89%of homeowners
Avatar for Bernal Construction
Bernal Construction
4.5(
38
)

Serving Thermal, CA and surrounding areas

In business since 1999

Free estimates

Emergency services offered

"Louise and Raul are a great team and communicate well through the process. We loved their recommendations, the subs they used were excellent, and they were patient with all my questions. Don't hesitate to give them a call - you will be completely satisfied with every aspect of their work."
Kitchen design & Appliances
Kitchen layout
Kitchen detail & countertops
Master Bath
Guest Bath

+11

Recommended by88%of homeowners
Avatar for MUSEUM QUALITY RESTORATION SVC
MUSEUM QUALITY RESTORATION SVC
4.6(
11
)

Serving Thermal, CA and surrounding areas

In business since 1970

Emergency services offered

"Mark Fry is a craftsman.   He fill with epoxy all joints and cracked woods.   He stripped paint to bare wood and sanded, cut-to-fit new birch panels between the stretchers.   When finished,  he sealed the bench with teak finish.    It is beautifully restored,  ready for another 100 years of use.
"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+10

Recommended by100%of homeowners
Avatar for Sonrise Fence Co
Sonrise Fence Co
4.3(
59
)

Serving Thermal, CA and surrounding areas

In business since 2011

Free estimates

Emergency services offered

"Nice people, they claim to give a lifetime warranty including resealing seems or any problem at all. They showed up as scheduled, took a bit longer than expected. I was very happy with the way it looked when they were finished. Im still happy with the way it looks. After they left I noticed they had drilled a hole in my concrete walkway and pounded in rebar to mount a gate post but they didn’t plan it right and I believe they called the owner out who decided to put the post in a more suitable place. Unfortunately the cracked concrete with a flush cut piece off rusty rebar remains as an eyesore. After a month or two the gate post on the opposite side began pulling out of the stucco on the side of my garage. I took it apart to find they used cheep plastic anchors so i just went and replaced them with metal concrete anchors myself so its never coming out again. I figured despite the warranty id just get it done. Fast forward to present June 2019 and i noticed that 2 of the base plates of the fence are not fastened to the concrete on one end allowing them to swivel out of place when the neighbors gardener does yard work it pushes them out of place. I contacted Sonrise and was given a date two weeks away that they would show up but they could not give a time. Sounds stupid but fortunately I’m retired and can sit home all day waiting for them to show up because hey what else do i need to do right? never showed up. I emailed again and the Forman called and apologized said he’d be out the following Friday. Never called never showed up. I emailed again and its been a week and a half with no response. so much for that lifetime warranty. I am really happy with the way the fence looks but cutting corners on simple stuff has me a bit confused because when you say lifetime warranty to fix ANYTHING wrong. Well you’d expect no short cuts because then you’d have to come fix the problems ... Unless... you have no plans to fix anything at all. I don’t care to write a review like this but when you jerk a customer around then just ignore them what else is left to do?"
Vinyl Fencing
Wood Fencing
Aluminum and Iron Fencing
Recommended by90%of homeowners
...
Showing 1-10 of 56
Welding questions, answered by experts

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:

  • Are you licensed and certified?

  • How long have you been in the welding business?

  • Do you commonly do the type of welding I need?

  • Do you offer any kind of warranty for your work?

  • Do you charge by the hour or by the project?

  • How long do you expect my welding project to take?

  • What steps do you take to minimize errors in your work?

Costs depend on unit complexity, labor, wall mounting needs, and additional accessories like floating shelves.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

The Thermal, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.