Get matched with top welders in Mecca, CA
Top-rated welders.

Need a pro for your welding project in Mecca, CA?

Select your specific project to find the pro for you.

Find Welders in Mecca

Avatar for Alex Ortega Welding Fabrication Services
Alex Ortega Welding Fabrication Services
4.5(
11
)

Serving Mecca, CA and surrounding areas

Approved

In business since 2016

Free estimates

Credit card accepted

"• The coupler on the trailer was bent. • The trailer itself was in good condition. • The owner called Alex Ortega for assistance. • Alex reviewed the situation and I purchased a new coupler from Harbor Freight. • Alex spent six hours welding the new coupler onto the trailer. • The job was done very well, and the owner was very pleased. • The owner recommends Alex Ortega for any welding jobs. • The owner uses the trailer to transport their trike and move items from stores. • The owner notes that paying for delivery from stores can add up, making a trailer a worthwhile investment."
Solar Panels cleaning
Solar Panels Project
Solar Panels Project
Solar Panels Project
Welding Project

+32

Response time2 days
Response rate99%
Recommended by50%of homeowners
Avatar for One Water Systems
One Water Systems
4.7(
49
)

Serving Mecca, CA and surrounding areas

In business since 2006

Free estimates

Emergency services offered

"The owner came and explained, what his system is going to do. He was not pushy like many others I had called before him. He was pleasant and easy to work with. I had done lot of home work before he was called and found him very honest and no exaggerations, which I liked so we gave him the contract.
The technician came on time, he was very professional and pleasant. The electrician was not going to come till later in the evening, we had some plans so asked if he can come earlier, some how he manged to come .The work took longer than expected to finish, but I am pleased with it.
I felt instant change in the water as I washed my hands, the water felt
sticky, but now my skin does not dry out. The glasses in the dishwasher
are spotless. I rated the quality as' B' because I do not like the taste
of water.
"
April 2013 Install
April 2013 Install
Valley Center Install
Additional Photos
Additional Photos

+11

Recommended by89%of homeowners
Avatar for Bernal Construction
Bernal Construction
4.5(
38
)

Serving Mecca, CA and surrounding areas

In business since 1999

Free estimates

Emergency services offered

"Raul did a great job for us. He took over a bathroom remodel job that had been started by another contractor. We know contractors don't like to do this, but Raul was willing to take on the challenge! He was excellent at communicating with us throughout the project, and kept to the budget. We would definitely recommend him!"
Kitchen design & Appliances
Kitchen layout
Kitchen detail & countertops
Master Bath
Guest Bath

+11

Recommended by88%of homeowners
Avatar for MUSEUM QUALITY RESTORATION SVC
MUSEUM QUALITY RESTORATION SVC
4.6(
11
)

Serving Mecca, CA and surrounding areas

In business since 1970

Emergency services offered

"The Chinese cabinet work was truly "museum quality". He did a far superior job than I thought possible and was very punctual and reasonably priced. He found things that needed to be done that were not visible before he started. He made these repairs without charging extra. I had to insist he accept payment for the extra work.
The bar stool wrapping was very clever. He accomplished a perfect wrap around arm surfaces that were themselves a continuous curve. The result was protection that looked like it was part of the barstool design (and probably should have been).
"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+10

Recommended by100%of homeowners
Avatar for ESI General Construction Inc
ESI General Construction Inc
3.9(
232
)

Serving Mecca, CA and surrounding areas

In business since 1979

Free estimates

Emergency services offered

"Reggie was very thorough and spend 2 hours to explain in all the details what's going to happen. We were very happy and if we decide to go ahead with the project, we will most likely contact General Construction again.
"
kitchen in tarazana
Recommended by73%of homeowners
Avatar for Sonrise Fence Co
Sonrise Fence Co
4.3(
59
)

Serving Mecca, CA and surrounding areas

In business since 2011

Free estimates

Emergency services offered

"Nice people, they claim to give a lifetime warranty including resealing seems or any problem at all. They showed up as scheduled, took a bit longer than expected. I was very happy with the way it looked when they were finished. Im still happy with the way it looks. After they left I noticed they had drilled a hole in my concrete walkway and pounded in rebar to mount a gate post but they didn’t plan it right and I believe they called the owner out who decided to put the post in a more suitable place. Unfortunately the cracked concrete with a flush cut piece off rusty rebar remains as an eyesore. After a month or two the gate post on the opposite side began pulling out of the stucco on the side of my garage. I took it apart to find they used cheep plastic anchors so i just went and replaced them with metal concrete anchors myself so its never coming out again. I figured despite the warranty id just get it done. Fast forward to present June 2019 and i noticed that 2 of the base plates of the fence are not fastened to the concrete on one end allowing them to swivel out of place when the neighbors gardener does yard work it pushes them out of place. I contacted Sonrise and was given a date two weeks away that they would show up but they could not give a time. Sounds stupid but fortunately I’m retired and can sit home all day waiting for them to show up because hey what else do i need to do right? never showed up. I emailed again and the Forman called and apologized said he’d be out the following Friday. Never called never showed up. I emailed again and its been a week and a half with no response. so much for that lifetime warranty. I am really happy with the way the fence looks but cutting corners on simple stuff has me a bit confused because when you say lifetime warranty to fix ANYTHING wrong. Well you’d expect no short cuts because then you’d have to come fix the problems ... Unless... you have no plans to fix anything at all. I don’t care to write a review like this but when you jerk a customer around then just ignore them what else is left to do?"
Vinyl Fencing
Wood Fencing
Aluminum and Iron Fencing
Recommended by90%of homeowners
Showing 1-10 of 46
Welding questions, answered by experts

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. 

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. 

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.).

There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:

  • Are you licensed and certified?

  • How long have you been in the welding business?

  • Do you commonly do the type of welding I need?

  • Do you offer any kind of warranty for your work?

  • Do you charge by the hour or by the project?

  • How long do you expect my welding project to take?

  • What steps do you take to minimize errors in your work?

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

  • Metal furniture repair: $35–$100

  • Pipe repair: $200–$1,000

  • Small gates: $550–$750

  • Fencing: $1,200–$1,800

  • Fabricated sheet metal welding: $750–$2,500

The Mecca, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.