We are a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. We offer a variety of General Contractor services that are customizable to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction!
"• The coupler on the trailer was bent. • The trailer itself was in good condition. • The owner called Alex Ortega for assistance. • Alex reviewed the situation and I purchased a new coupler from Harbor Freight. • Alex spent six hours welding the new coupler onto the trailer. • The job was done very well, and the owner was very pleased. • The owner recommends Alex Ortega for any welding jobs. • The owner uses the trailer to transport their trike and move items from stores. • The owner notes that paying for delivery from stores can add up, making a trailer a worthwhile investment."
Beaver Inc. is a metal fabrication and welding company based in Thousand Palms, CA, bringing skilled craftsmanship to the desert communities of Southern California. They specialize in wrought iron fence installation and repair, custom metal structures, sheet metal and ornamental fabrication, and metal stairs and railings for both residential and commercial clients. Whether it's a new install or a precision weld repair, Beaver Inc. delivers dependable, quality work across the Coachella Valley and beyond.
.Western Pacific Roofing Corporation is a full service roofing contractor in business since 1949. We offer Professional Service and High Quality Workmanship. Western Pacific Roofing has been installing roofing for over 64 years and has evolved to become one of the most experienced roofing contractors in the state of California. This longevity has only been possible due to our employees' commitment to the relationships they have built with our clients over the years. Our longevity of experience and the relationships we have formed over the years have become the most important components of Western Pacific Roofing’s success. We service all of California including Alameda, Fresno, Imperial, Kern, Los Angeles, Marin, Orange, Riverside Sacramento, San Bernardino, San Diego, San Francisco, Santa Barbara, Santa Cruz, Tulare and Ventura Counties. We are able to accomplish this with our four facilities located in Northern Los Angeles County, San Gabriel Valley, Riverside County and Northern California. Although the majority of our work is within Southern California, over the years, we have completed multiple large industrial and commercial roofing projects throughout the Southwest. We also have completed projects as far North as the State of Washington, including Wyoming and as far West as the State of Hawaii.
Locally owned & operated. Hard Water is defined as water that contains dissolved minerals (usually but not limited to calcium and magnesium bicarbonate) expressed in grains per gallon. The lower the mineral content of the water, the “softer” the water (and the more corrosive); while higher mineral content means “harder” water. - See more at: http://www.onewatersystems.com/how-it-works/amp-force-technology/#sthash.0JZHCNxP.dpuf
Home Remodeling, Repairs and Maintenance are the core services that we provide to our customers. Custom Home building is a specialty that we offer because we enjoy the entire home building experience. As a general contractor we offer our customers the benefits of an experienced and licensed contractor and a strong team of specialized trades contractors well known for quality craftsmanship. When you hire us you get the experience of a homebuilder, quality of a specialist and a price that is reasonable and competitive.
Restoration and Repair Services of Fine Antiques & Furniture. All types of repairs, and all types of finish. Original finishes restored.\n\nOur meticulous attention to detail and clear focus assure you of work that will sustain the test of time.\n\nInvest in quality work now to avoid costly upkeep in the future.
"Debbie and her professional team did an outstanding job on a custom made, iron welded driveway gate for our 1934 Spanish-style home in the Palm Springs old movie colony area. The work was well managed and the artistry of the final product -- magnificent. Would refer this company to others with no hesitation."
"They are hands down the best investment I ever made in my life. I had a very odd shaped area that I needed fenced off, but I have a very modern looking house. He came and took measurements within two days. He then came back with the final measurements with his welder. It was so fast. He had these 9' beautiful fences. They powder coat them to the color you want. His design is awesome. The property line is a little angled, so the fences wouldn't fit because the metal is so tall, so they went overnight and welded a new piece. It is so nice. After that, it was so good, I had them redo my garage door in the same style. That again, took nine business days. It was just perfect. It sounds expensive, but these were big gates. They ran 25' of fencing and then another 7' on one side. They also put in two doors that have deadbolts, with many angles. It's not just an average garage. My house was built in the 1920's, so they went way beyond. It wasn't like putting on a new door, they had to build a new steel frame, and then they had to inset it into the roof line. It was so much more than you could ever expect. I can't stop talking about it. They were just so good. They put two working barn doors on the garage with separate locks. It is very detailed. They were so professional. It's so hard to find in LA people that you want to work with again. They are going to do a 30' fence along the back of my house, so I will be using them again in a couple of months. I don't know how much more I could gush about them. I had been avoiding doing the work because I'm use to people coming up with excuses. They were just problem solvers. They were fixing problems and making them work versus trying to up charge you after the fact. It was very straightforward and the price didn't change. I think they did more work than they initially thought, but there was no haggle on the price or anything."
Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.
Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.
Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.
Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.
The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it.
Some of the most common metals used by welders include:
Magnesium alloy: $7–$16 per pound
Low-carbon steel: $11–$12 per pound
Stainless steel: $13–$15 per pound
Copper/brass: $24–$29 per pound
Cast iron: $38–$79 per pound
Titanium: $60–$85 per pound
Yes, you can cut up a box spring., but you’ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.
The Bermuda Dunes, CA homeowners’ guide to welding services
From average costs to expert advice, get all the answers you need to get your job done.
When you need help with a metal project and don’t have the expertise or the time, call an expert welder for your project. Here’s how to vet and hire a welder.
