Get matched with top door pros in Somis, CA

A door sill is the bottom portion of your door frame, while a threshold is the transition piece that separates the two types of flooring between rooms, or serves as the transition between the interior and exterior on an exterior door. The threshold sits on top of the door sill. A kick plate is a protective plate that sits against the face of a door to prevent damage to the door from feet and shoes. You’ll usually only find kick plates on exterior doors, while every door has a door sill, and most exterior and interior doors have a threshold.

You want plenty of room between your pre-hung door and the framing in your wall to allow for shimming to get the door into the perfect position, so aim for about 1 inch on the top and both sides. That means you should make your rough opening about 1 inch taller and 2 inches wider than your pre-hung door. You’ll then use shims to stabilize and level the door before installing it.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

There aren’t many problems with fire doors except that they slow down or cut off ventilation at the higher rating levels. For this reason, work with a professional to ensure you have adequate ventilation throughout your house or workspace. The sealing around a fire door is meant to allow for a specific amount of ventilation and will need regular inspections to ensure adequate airflow.