Get matched with top fencing pros in Shaver Lake, CA

A high-quality wrought iron fence is one of the most durable options available and can last a lifetime, or even centuries, with proper care. However, wrought iron is susceptible to rust and corrosion if not maintained.

To maximize its lifespan, regular maintenance is required. This includes:

• Cleaning the fence with soapy water every six months.

• Scrubbing away any rust or corrosion as soon as it appears.

• Applying a new coat of paint or refinishing the fence every few years to protect the metal from moisture and oxygen. The recommended frequency varies, with sources suggesting anywhere from every 1 to 10 years.

If significant rust develops, it's wise to hire a professional fence repair company to clean the rust and reseal the fence. The cost to refinish a fence is typically between $5 and $12 per square foot, a worthwhile investment to ensure its longevity.

A well-maintained pipe fence can last anywhere from 20 to 50 years, depending on factors like material, climate, and maintenance. Galvanized or coated pipes resist rust and corrosion better than other alternatives, so they tend to last longer, especially in humid or wet environments. Routine maintenance, such as inspecting for damage, removing rust, and applying protective coatings, helps extend the fence’s lifespan significantly.

Most homeowners don't need to inform their neighbors before constructing a fence, according to the law, but you will need to make sure that you’re building on the property line or on your side of the property line. Otherwise, the neighbor could complain, which would require you to tear down and reinstall the fence. In any case, keeping them in the loop is the neighborly thing to do!

Whether you inform your neighbors or not, always use property records and a land survey to ensure your fence stays within your property boundaries.

Yes, you can use a floor jack to remove fence posts. Attach a stem to the base of the fence post so you can position the floor jack underneath. The stem can be a scrap piece of wood attached with nails or a sturdy nail itself. Put the jack beneath the stem and push the lever to lift up on the fence post and remove it from the ground.