Get matched with top buffing and polishing pros in Seaside, CA

Yes, it is possible to buff and polish your floors yourself, particularly for smaller areas. However, this is considered an intermediate-level DIY project that is time-consuming and requires patience and know-how. The process involves cleaning the floors before applying a polish, which can be done manually with a cloth or with a rented or purchased floor buffer and buffing solution. If not done correctly, you risk leaving burn-like marks, puddles, or an uneven finish, which could lead to costly repairs. For larger spaces or to ensure a professional result, hiring a professional is often worthwhile. They use industrial equipment to complete the job faster, providing a deep clean and a more even, polished finish without damaging your floors.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Buffing is a less expensive and less time-consuming alternative to other floor repair techniques, but it’s only ideal for removing surface-level scratches and damages. Floor-buffing machines work to gently smooth out the floor’s top layer rather than removing it the way that sanding does. 

This process is ideal for gently worn floors, but it won’t have the desired impact on floors with severe damage. On the other hand, sanding fully strips the floor’s top layer so damages beneath the surface are accessible to remove or repair. Since the process is more involved, it requires more time, tools, and experience to achieve the best possible results.

In many cases, it’s worth it to restore stone. Stone restoration generally costs less than replacing the stone entirely, helping to save on the cost of your project while still giving your home’s stone a polished appearance. However, if your stone is very cracked or crumbling to the point of compromising the structural integrity of your home, you may want to consider replacing it. Stone flooring costs range from $6 to $20 per square foot on average.