Get matched with top pressure washers in Riverside, CA

Whether you need to winterize your pressure washer depends on where it will be stored. If it's kept in a location where temperatures could drop to freezing, any liquid left in the water pump can freeze, expand, and cause severe damage to the machine. To prevent this, you can add antifreeze to the pump. While emptying the machine with compressed air is an alternative, it can be a tedious process and may not remove all the liquid. If you can store the pressure washer in a relatively warm place with no risk of freezing, you won't need to add antifreeze. However, regardless of storage conditions, it is good practice to empty the gas chamber and refresh the oil before storing it for the winter.

Depending on the amount of experience you have with power washing or pressure washing, hiring a professional is likely a better option. Using a pressure washer requires a bit of know-how to avoid damaging siding, trim, roofing shingles, and even the seals on your windows. Holding the pressure washer too close to the material you’re cleaning can cause damage to the surface. You can wash your home’s exteriors with a garden hose, but high-pressure cleaning should be done by professionals. 

You can power wash your screen porch floors on a low setting to avoid damaging the walls or screens they contact. If you’re careful, you can use a power washer on the lowest setting for your porch screens. However, using a hose with a spray attachment reduces the risk of ripping the screen mesh and works as well as a power washer.

The ideal PSI (pounds per square inch) for a pressure washer depends on the surface you are cleaning. For general home use, a pressure washer with a range of 2,000 to 3,000 PSI is recommended and powerful enough for most residential projects.

The specific PSI you should use varies by task:

• High-Pressure Tasks (2,500-3,000 PSI): Tough materials like concrete, stone, masonry, and brick can handle higher pressures. This is suitable for removing stubborn stains from driveways or cleaning graffiti.

• Low-Pressure Tasks (around 600-1,300 PSI): Softer surfaces require a gentler touch to avoid damage. Use a low PSI setting for cleaning wood decks (especially softwoods like pine and cedar), vinyl siding, outdoor furniture, and stucco.

For best results, choose the right nozzle for your surface, such as a 15-degree nozzle for siding or a surface cleaner attachment for driveways. Using an extendable wand can also make the work easier and more ergonomic.