Best roofers near Kingsburg, CA

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Properly installed chimney flashing can last anywhere from 15 to 50 years. However, flashing generally only needs to be replaced when it is damaged, corroded, or no longer creates a watertight seal. Several factors influence its longevity, including the material type, quality of installation, and local climate. For example, copper flashing tends to last longer than galvanized steel. Large storms and extreme weather can also damage flashing, potentially requiring earlier replacement. To ensure its longevity, it is recommended to have your chimney and roof inspected annually. A professional can assess the flashing's condition and recommend any necessary repairs.

You can replace a roof in the winter, though it’s not the most popular time to do so. The biggest drawback of winter roofing work is the weather. Snow and ice make for dangerous, slippery working conditions. Plus, shingles can only be installed in temperatures above 40 to 45 degrees. 

The best time to replace a roof is in the spring or fall when the weather is mild. However, you can likely save some money by booking the job in the winter off-season, when roofers have more availability. 

The minimum recommended slope for a porch roof is 1/4:12, which means 1/4-inch of rise every 12 inches of run. Slopes of 3:12 and 4:12 are more common and provide faster drainage for runoff. Make sure to choose a pitch that’s appropriate both for the climate in your area and the type of roof material you install. Hire a roofer if you need help determining what the right roof pitch is.