Get matched with top roofers in Visalia, CA

Yes, replacing a roof is always a good investment if the current one is in poor condition. Not only will it preserve the structural integrity of the home, but it can also add value at the time of sale. The average return on investment for a new roof is between 48% and 61%. Prospective buyers are also more likely to purchase a home with a recently replaced roof since that means they won’t need to worry about that expense in the near future.

A roof pitch multiplier is an accurate way to calculate roof square footage, and it’s handy for purchasing the correct amount of materials. To determine your roof pitch multiplier, you'll need to calculate the roof slope, square it, and add it to 144. Next, find the square root of the total and divide it by 12. The answer is your roof pitch multiplier. Once you know the roof pitch multiplier, multiply it by the total square feet of your building to determine the total roof surface area.

As with any roofing material, there are benefits and drawbacks to consider before installing roll roofing. On the plus side, roll roofing is budget-friendly, lightweight, and comparatively easy to install. It is also ideal for low-sloped roofs and lasts around 10 years. The cons of roll roofing, however, include its low durability compared to roofing materials, restricted color choices, and low ROI.

Pros:

• Low-cost

• Lightweight

• Cut to size

• Easy and quick installation 

• Designed for low-sloped roofs

• Waterproofs your roof for an average of 10 years

• Easy to purchase and transport

Cons:

• Less durable than asphalt shingles

• More prone to cracks and tears

• Short life span

• Not as many color or style choices

• Not as aesthetically pleasing as shingles, wood, or clay tiles

• Not preferred for a higher home resale value

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.