Get matched with top affordable plumbers in Frazier Park, CA

Deteriorated seals, O-rings, or gaskets are common culprits behind a leaky sink after you’ve turned off the water—especially if your sink is older than 15 years. Inspect each of these mechanisms in your sink for signs of corrosion or looseness, then replace the worn-out part to fix it. Older sinks may be worth replacing if several of the parts are worn-out.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If you're dealing with a clogged sink drain, you may be able to avoid removing the drain by using a plunger to dislodge the clog. While we associate plungers with toilets, they can do the same job with your sink drain. Be gentle, though, as forceful movements can push clogs further into your plumbing system and make them more difficult to remove. Additionally, make sure you’re using a sink plunger—with a flat bottom—and not a toilet plunger—which has a smaller bottom protruding from the larger flat piece.

Yes, you can water plants with water softened with potassium chloride. Potassium is a vital nutrient for plants, so using this type of water is harmless and can even be enriching. It is often a better option than water softened with sodium chloride, as too much sodium can build up in the soil and make it difficult for plants to absorb the water they need. If you notice that your plants are not tolerating the treated water, try letting it sit in a watering can for one to five days to allow the chlorine to diminish.