Get matched with top roofers in Citrus Heights, CA

Asphalt shingles blister when air gets trapped between building materials, either within the layers of the shingle itself or in adhesives on the undersides of the shingles. As the roof heats up in direct sunlight, the trapped gas expands and creates a bubble in the roof. Eventually, the bubble can pop, leaving an exposed area of decking and underlayment.

A well-maintained tile roof can last anywhere from 40 to over 100 years, with its exact lifespan depending on the material and level of care. Proper maintenance, which includes keeping the roof clean, free of debris, and performing routine repairs for any cracked tiles, is crucial for longevity. The lifespan varies significantly by tile type:

• Clay, terracotta, and slate tiles are highly durable and can last over 100 years.

• Concrete tiles typically last from 30 to 100 years.

• Metal tile roofs generally last between 40 and 70 years.

• Composite tile roofs have a lifespan of 20 to 50 years.

Be aware that maintenance for a tile roof can sometimes be more expensive than for an asphalt roof.

Metal roofing offers durability, energy efficiency, and resistance to extreme weather conditions. It can reduce cooling costs, has a longer lifespan than traditional materials, and provides a sleek, modern appearance, adding value to a property.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.