Get matched with top drain cleaners in Winslow, AZ

Applying drain cleaner is a common DIY solution to clogged drains, but it can be extremely harmful to your pipes and lead to corrosion and leaks. It is almost always better to try snaking a clog than using a drain cleaner, but the best solution is to hire a professional plumber. They can locate the clog and gauge the severity using a camera system and then decide if using a plumber’s snake, auger, or drain cleaner is the best option to remove the clog and limit damage to your plumbing system.

Pouring drain cleaner down a vent pipe isn’t recommended. First of all, unlike a clog in a sink or bath caused by such material as soap scum build-up, toothpaste, and hair, clogs in a vent pipe are likely the result of debris from trees or even an animal stuck in the pipe. Drain cleaners won’t be able to eat through this kind of material. The cleaner will only become clogged in the vent with the debris, causing even more problems.

On average, a plumber will take 30 minutes to two hours to clear a clogged drain. If the clog is located close to the drain or an access point and isn’t severe, the project will take about half an hour. If the clog is deep within your plumbing system or is a severe blockage, it can take two or more hours to remove the clog. For this reason, main line clogs tend to take longer, usually between two and three hours.

Some homeowners use additives every month to help septic system performance, but according to the U.S. Environmental Protection Agency, the effectiveness of septic system and leach field additives is unknown. Further, additives made with organic solvents or alkali chemicals can actually be harmful to the necessary bacteria in a septic system.