Top-rated structural engineers.

Get matched with top structural engineers in Spring Valley, AZ

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Spring Valley, AZ?

Select your specific project to find the pro for you.

Find Structural engineers in Spring Valley

Avatar for PJM Structural

PJM Structural

4.98(
23
)
Approved Pro

PJM Structural

4.98(
23
)
Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
2 years of experience

Licensed Structural Engineer with 13 years of structural design experience. I provide the following services: - New construction design (Residential, commercial, office, etc) - Remodels and Tenant improvements - Truss repairs - Bearing wall removal - Trellis, pergola and carport design - Concrete, Steel, Wood and Masonry design - Custom stairs

"Pedro was great to work with! After multiple attempts to work with other structural engineers, his rate was the lowest while being the most responsive and informative. He made the process smooth and efficient, providing excellent service and clear communication throughout the project. Highly recommend!"

Hilary C on July 2024

Licensed Structural Engineer with 13 years of structural design experience. I provide the following services: - New construction design (Residential, commercial, office, etc) - Remodels and Tenant improvements - Truss repairs - Bearing wall removal - Trellis, pergola and carport design - Concrete, Steel, Wood and Masonry design - Custom stairs

"Pedro was great to work with! After multiple attempts to work with other structural engineers, his rate was the lowest while being the most responsive and informative. He made the process smooth and efficient, providing excellent service and clear communication throughout the project. Highly recommend!"

Hilary C on July 2024


Avatar for Arizona Foundation Solutions

Arizona Foundation Solutions

4.42(
55
)

Arizona Foundation Solutions

4.42(
55
)
Customers say: Quality work
37 years of experience

The only ICRI Certified company in the state of Arizona! If your home has cracks in floors or walls, or has windows and doors out of alignment, call today for a comprehensive foundation inspection. Phoenix residents please call 6024701311. *Online quotes are unavailable and an initial consultation must take place in order to examine the extent of the foundation problem.* For more information on foundation solutions and blogs from Bob visit: http://www.foundationrepairsaz.com

"***STAY AWAY*** They should remove the word "Solutions" from their name. That is far from what they provide. I started the process with Arizona Foundation "solutions" back in May of 2021 to fix a retaining wall/foundation. After meeting with the sales person they did let me know that they can proceed with engineering the "solution". After about 30 days I met with the sales person again so he could present the "solution" and take a deposit. I agreed to the option they offered and they stated I would be on the calendar to be completed before December 2021. During the permitting process there were items that came up that were needed from me directly by the county. These items were provided. After these items were provided I had not been contacted by anyone at the company to schedule the repair. At at the same time I was told by the county that Arizona Foundation "Solutions" was needing more engineering from me to complete the job. Obviously this was concerning as I should have heard about this directly from the company I was spending ten's of thousands of dollars with. However it was crickets. After reaching out to the sales person by call, text, email with no response before the holidays, I gave him the benefit of the doubt and waited until after the holidays and tried again with no avail. I then was put in contact with the "Area Sales Manager" whom after a week reviewed everything and let me now that the project they had in their hands for 7-8 months now was unfortunately out of scope for their company to complete and said they would be refunding me my deposit. I questioned how was this job reviewed and drawn out by an engineer and yet its somehow not able to be completed by them? Another week went by and the same manager contacting me and let me know that the owner reviewed and said they would solve this and get the job completed. I mistrustfully agreed for them to continue. After waiting another 2 weeks with no communication, I reached back out only to find out they were wrong and actually could not come up with a "solution" and would be refunding me my deposit (again). I waited another 2 weeks for my check to come in the mail and then called again to now find out they sent the check to a wrong address and would need to cancel that check and send out another. I asked for them overnight the check for my inconvenience and the refused to as this was an "additional cost that had to be approved". Throughout the most recent 2 months I tried to get the owners (Bob Brown) attention by phone/email to discuss my entire situation and was told he was in "meetings" 10/10 times I called. I was FINALLY able to get him to call back once I called every hour on the hour same day. As I expressed to the owner, the incompetency and ignorance starts at the top at his company. Not only was the communication poor at best during my dealings, the fact that an apologize nor any remorse was expressed on how my customer service experience was. A few key items to any contracting/construction work is setting expectations, communication, and follow through. NONE of which was provided by Arizona Foundation "Solutions". This type of work is extremely costly and any company completing it should be handling their customers with at least some respect while they spend a price of a new car or part of a college tuition on."

Michael V on March 2022

The only ICRI Certified company in the state of Arizona! If your home has cracks in floors or walls, or has windows and doors out of alignment, call today for a comprehensive foundation inspection. Phoenix residents please call 6024701311. *Online quotes are unavailable and an initial consultation must take place in order to examine the extent of the foundation problem.* For more information on foundation solutions and blogs from Bob visit: http://www.foundationrepairsaz.com

"***STAY AWAY*** They should remove the word "Solutions" from their name. That is far from what they provide. I started the process with Arizona Foundation "solutions" back in May of 2021 to fix a retaining wall/foundation. After meeting with the sales person they did let me know that they can proceed with engineering the "solution". After about 30 days I met with the sales person again so he could present the "solution" and take a deposit. I agreed to the option they offered and they stated I would be on the calendar to be completed before December 2021. During the permitting process there were items that came up that were needed from me directly by the county. These items were provided. After these items were provided I had not been contacted by anyone at the company to schedule the repair. At at the same time I was told by the county that Arizona Foundation "Solutions" was needing more engineering from me to complete the job. Obviously this was concerning as I should have heard about this directly from the company I was spending ten's of thousands of dollars with. However it was crickets. After reaching out to the sales person by call, text, email with no response before the holidays, I gave him the benefit of the doubt and waited until after the holidays and tried again with no avail. I then was put in contact with the "Area Sales Manager" whom after a week reviewed everything and let me now that the project they had in their hands for 7-8 months now was unfortunately out of scope for their company to complete and said they would be refunding me my deposit. I questioned how was this job reviewed and drawn out by an engineer and yet its somehow not able to be completed by them? Another week went by and the same manager contacting me and let me know that the owner reviewed and said they would solve this and get the job completed. I mistrustfully agreed for them to continue. After waiting another 2 weeks with no communication, I reached back out only to find out they were wrong and actually could not come up with a "solution" and would be refunding me my deposit (again). I waited another 2 weeks for my check to come in the mail and then called again to now find out they sent the check to a wrong address and would need to cancel that check and send out another. I asked for them overnight the check for my inconvenience and the refused to as this was an "additional cost that had to be approved". Throughout the most recent 2 months I tried to get the owners (Bob Brown) attention by phone/email to discuss my entire situation and was told he was in "meetings" 10/10 times I called. I was FINALLY able to get him to call back once I called every hour on the hour same day. As I expressed to the owner, the incompetency and ignorance starts at the top at his company. Not only was the communication poor at best during my dealings, the fact that an apologize nor any remorse was expressed on how my customer service experience was. A few key items to any contracting/construction work is setting expectations, communication, and follow through. NONE of which was provided by Arizona Foundation "Solutions". This type of work is extremely costly and any company completing it should be handling their customers with at least some respect while they spend a price of a new car or part of a college tuition on."

Michael V on March 2022


Avatar for Dakota Equipment Manufacturing Inc.

Dakota Equipment Manufacturing Inc.

No reviews yet

Dakota Equipment Manufacturing Inc.

No reviews yet
13 years of experience

Dakota Equipment Manufacturing Inc. (DEMI) is a small family-owned business with a big passion for heavy equipment manufacturing. With over 30 years' worth of cumulative experience and knowledge in the aggregate and mining industry, we stand behind each of our products. Our equipment is specially fabricated and designed for each customer and proudly made in the USA. DEMI offers a wide range of services from equipment maintenance, replacement parts & wear media installation, equipment design & plant layout, equipment rebuilds, custom turn-key crushing & screening operations tailored to your specifications. Today, DEMI Equipment serves the entire United States, Canada, and international markets. Our headquarters and manufacturing facility are located in Aberdeen, South Dakota, and our service department is located in Phoenix, Arizona.

Dakota Equipment Manufacturing Inc. (DEMI) is a small family-owned business with a big passion for heavy equipment manufacturing. With over 30 years' worth of cumulative experience and knowledge in the aggregate and mining industry, we stand behind each of our products. Our equipment is specially fabricated and designed for each customer and proudly made in the USA. DEMI offers a wide range of services from equipment maintenance, replacement parts & wear media installation, equipment design & plant layout, equipment rebuilds, custom turn-key crushing & screening operations tailored to your specifications. Today, DEMI Equipment serves the entire United States, Canada, and international markets. Our headquarters and manufacturing facility are located in Aberdeen, South Dakota, and our service department is located in Phoenix, Arizona.



Avatar for Robbins Engineering

Robbins Engineering

No reviews yet

Robbins Engineering

No reviews yet
27 years of experience

Established in 1998, Robbins Engineering has been providing the same excellent quality service of on-sight waste water treatment & systems for over 10 years. Some of our specialties include: inspection, design, and testing of septic tanks, water lines, and sewer lines. We also provide grading, draining, as well as provide waste water contracting services. Call us today to discover why we're considered the area's best!

Established in 1998, Robbins Engineering has been providing the same excellent quality service of on-sight waste water treatment & systems for over 10 years. Some of our specialties include: inspection, design, and testing of septic tanks, water lines, and sewer lines. We also provide grading, draining, as well as provide waste water contracting services. Call us today to discover why we're considered the area's best!


Structural Engineering Services for: - New Construction (Residential, Office, Commercial) - Remodeling - Tenant improvement

Structural Engineering questions, answered by experts

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

Most structural engineers offer free quotes, regardless of the size of the job. For simple inspections when buying or selling a home, engineers typically charge a flat fee that may be based solely on your home’s foundation type and square footage. For larger projects, like new construction and major home renovations, an engineer will either perform an analysis of your project and site and provide you with a formal estimate, or they will do a more in-depth assessment and in-person site inspection before coming up with a per-hour or per-project cost estimate. In most cases, the estimate is free.

Foundation cracks that are 1/8 inch wide or less, aren’t uneven across the gap, and don’t continue widening over time are usually just normal settling cracks and don’t suggest structural issues. Horizontal cracks and stair-step cracks on foundation walls, any cracks that continue widening, are wider than 1/8 inch, or where one side juts out beyond the other, are often indicative of structural damage.

On average, 6 inches of concrete can hold around 150 pounds per square foot, but the exact weight that 6 inches of concrete can hold depends on factors such as the type of concrete, the reinforcement method, soil conditions below, and structural design. If you’re concerned about the longevity of your concrete patio, walkway, or driveway, hire a professional to help you choose an appropriate concrete thickness and reinforcement method for your needs.

The depth of any foundation style depends on your climate and how deep the frost line is, as building code requires that the footers of a foundation—which are built into a monolithic slab—sit at least a foot below the frost line. At the southern tip of Florida, for example, a monolithic slab foundation would only need to sit 12 inches under the soil at the widest parts. On some parts of the Canadian border, the frost line is 100 inches, which would mean a minimum of 112 inches, which is prohibitively deep for a monolithic slab.

The Spring Valley, AZ homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"