Get matched with top countertop and backsplash pros in Spring Valley, AZ

Concrete countertops require regular upkeep and can be harder to maintain than other materials. For daily cleaning, use a mild, pH-neutral cleaner and avoid harsh, acidic products that can damage the sealant. It's important to wipe up spills immediately, especially from acidic substances, as concrete stains easily. To prevent scratches, always use a cutting board. The countertops must be resealed periodically—at least once a year—to protect them from stains and moisture. Be aware that concrete is also prone to cracking over time and may require repairs.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

Installing granite kitchen countertops costs about $3,250, ranging from $2,000 to $4,000, depending on the quantity and quality of the granite, use of granite tile or granite slabs, the type of granite, and its color and texture. Varieties of granite include:

• Alaska white: $35 per square foot

• Ubatuba: $30–$60 per square foot

• Silver cloud: $35–$40 per square foot

• Absolute black: $45–$60 per square foot

• Black galaxy: $50–$70 per square foot

• Blue Louise: $70–$100 per square foot

• Crema Bordeaux: $80 per square foot

• Solarius: $60 per square foot

You can cut countertops without chipping by using your saw correctly and having a new fine-toothed blade. You can also put masking tape on the front of the countertop material across the cut line and cut from front to back. However, it is very hard to cut countertops without chipping them, especially if they are made of stone or more fragile materials like laminate. The best advice is to know how to use the equipment, use the correct cutting method for the material, cut from back to front, move slowly, and practice on scrap material first.