Get matched with top fencing pros in Saint Michaels, AZ

Privacy fences in residential neighborhoods tend to stand between 6 and 8 feet tall, but local building code usually dictates the maximum height. Livestock fences that border large land plots range from 3 to 6 feet. Shorter, decorative fences, which are common in front yards, are around 3 feet tall, on average. Fence height also tends to vary by material, with wood fences usually sitting at 6 feet tall, and chain-link and wrought iron fences tending to sit at half that.

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

The best wood for fence posts are redwood, cedar, and pressure-treated pine. Wood posts made from these materials will typically lasts between 15 and 30 years, depending on the specific type you choose and your local climate. With proper care and maintenance, a fence post made of these materials can withstand most weather conditions.

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust.