Top-rated electricians.

Get matched with top electricians in Patagonia, AZ

Enter your zip and get matched with up to 5 pros

Need a pro for your electrical service project in Patagonia, AZ?

Select your specific project to find the pro for you.

TRUSTED BY PATAGONIA, AZ HOMEOWNERS

  • Average homeowner rating star icon4.4
    Average homeowner rating
  • Verified reviews icon17
    Verified electrical services reviews

Find Electricians in Patagonia

Worker Bee Home Services
New to Angi
Portable Generator - Repair

Serving Patagonia, AZ and surrounding areas

Approved

Servicing Southern Arizona for fifteen years, we can handle most residential concerns from remodels to TV installs at a fair rate with a workmanship guarantee! \n\nAny size job can find a place on our schedule, just reach out and we'll lend a hand. We can help you build, plumb, drywall, remodel, paint, or trim your home or install electronics, repair appliances, and get your small engines running again! \n\nWe at Worker Bee believe in integrity and fairness at all times, and our first priority is always the client's happiness and trust. We come with experience, references, and knowledge to help guide you through any task or project. \n\nCall us today, and see for yourself!

Porch Rebuild
Porch Rebuild
Porch Rebuild
Porch Rebuild
Porch Rebuild

+18

Garrett Electrical, Inc.
5.0(
2
)
Electric Vehicle Charging Station InstallationElectric Vehicle Charging Station Installation - For BusinessElectric Vehicle Charging Station Installation - For Business - Materials Not Provided+8 more

Serving Patagonia, AZ and surrounding areas

In business since 1990

Credit card accepted

"Garrett did some work, installed a circuit for an RV I have at my home and also an additional for my wife's charging receptacle for my wife's electric car. The work was good. He came out and he was very busy. The only negative flaw on his company was he does not take card at the time. So I couldn't instantly pay him, I'm currently doing a payment program which he really doesn't like, and I'm getting hit with a fee every month now that I have to drag this payment out. That was largely due to the fact that he does not have a card swipe reader or any kind of mobile payment technology. You have to wait until he sends you a bill. That's the only flaw, his work was really good. I've had no problems  I would probably use him again, and his quote was right on the money pretty much, what he quoted me wasn't above or below, it was right on the money so to speak. but definitely good work. He came out was very friendly, he pretty much had the work done in about half a day because he basically had to do some external work and cut into the exterior of my house to run the pipe through to at least get the pipe routed into the junction box and put the additional breaker on there but all in all I would definitely probably use him again although admittedly I would prefer a provider and anyone who wants to be able to pay either by card or instantaneously would probably want to go to a different provider until he changes that practice of his. I had him put in two receptacles and a circuit breaker, one for an RV and the other was an internal inside my garage for a portable stage two charger for my wife's electric car. It was all one bit of work. He did a very good job. He was very honest and forthright if he couldn't make it. He had to cancel a couple times. I contacted him sometime around April or May and the work wasn't until a little bit later but basically he was very conscious. He was very busy obviously, it was getting close to summer time in Arizona which means a lot of people getting either new air conditioning units and stuff like that which require electrical work and stuff like that so he was very conscious about if he couldn't make an appointment or and discussions he talked to me throughout the work of this is what I'm doing, here's how I'm going, here's how I would prefer to do it. He was willing to take my input so it was very attentive to me as a customer. That's really the biggest flaw, because he doesn't have a portable payment service it makes things a little bit hard. Also his business office, he has someone handle the books separately for billing and stuff like that and then his wife mails out the notices so he doesn't have an extensive office so that can be a little complicated. He's a small business owner and therefore obviously you can't expect him to have someone who sits constantly at a business office and goes okay call this number for billing and stuff like that. You have to wait for the invoice which can be a few weeks if his wife is basically the one doing the billing portion of it and they have children, as a parent with 2 small children I can understand things get busy so it is a small predominately family owned operation. Which means it's subject to those same pressures as well they're a family and kids get sick and have school trips or other stuff like that so it can delay his billing a little bit. The previous gentleman that I contacted quoted me a price at about $900 or so but he preferred that I buy all the circuit breakers and materials. Mr Garrett basically said look I'll provide the appropriate plugs and all of that. Tell me what your needs are and everything and I'll provide my part. He has his own parts so he preferred to use his parts that he sourced which was fine with me, so that did increase the price. So based on what I paid for all of my stuff I would say he was definitely higher than the previous quote but he was also basically willing to stand behind the components that he sourced. I would give him a B for price but it was professional work and there's not enough electricians and I would say it was a little more expensive based on the previous statement and from what I've researched form your site and a couple of other places.Given the work that was done I don't know how he can be any cheaper, but he definitely seemed to be in the ballpark of that kind of work. It wasn't exceptionally low or exceptionally high from my understanding. I've had no problems with the work he's done. As I said previously, he was very quick to communicate with me if there were any issues that was going to delay him getting out here which was a couple times due to emergency work like people with infants needing immediate electrical work to restore air conditioning or stuff like that. So he was always very very quick to communicate with me, and during the work he several times he had me come out to show me the work he was doing asked my permission to make changes that he felt was necessary to make go as smoothly, so he was definitely an A in his communication skills with me as a customer.  Punctuality is a B, but that's largely because of  a schedule he could not control. The day that he actually said he was coming out, he came out on time so I would say an A. I initially said B but not so much, more an A. He was definitely very professional. Highly likely to use again the only difference that I would do is if I were to find someone of the same rating as he that served my local area and took payment by card the day that the service was done. That would be the only discriminator."
Recommended by100%of homeowners
South AZ Electric, LLC
5.0(
4
)
Ceiling Fan - InstallElectric Vehicle Charging Station Installation - For Business - Materials Not ProvidedElectric Vehicle Charging Station Installation - For Business - Materials Provided by Consumer+11 more

Serving Patagonia, AZ and surrounding areas

In business since 2022

Free estimates

Credit card accepted

"They arrived ahead of time and were extremely courteous and very knowledgeable. Javier explained everything they were doing the entire time. I would highly recommend Javier and South AZ Electric. I will be using them again without hesitation."
Rough-In Electrical
Response time5 hrs
Recommended by100%of homeowners
Avatar for Sunshine Experts,llc
Sunshine Experts,llc
4.7(
179
)
Ceiling Fan - InstallCeiling Fan - RepairElectric Vehicle Charging Station Installation+14 more

Serving Patagonia, AZ and surrounding areas

In business since 2001

Free estimates

Credit card accepted

"Our main installer was Jesus, and he carefully explained each step of the work and then went over all the information we would need to know. We are very happy with all three items, saving electricity with the SolaTube as we no longer have to turn lights on during the day in our Master bath dressing area, we hope that the Solar attic fan is helping to keep the house cooler by exchanging the air in the attic when it gets hot. In our small home office we replaced an old skylight with new double glass skylight with a shade system and this has made a big difference in the office. Sunshine Experts, LLC did a great job for us and we are very happy to recommend them when anyone asks us about our experience."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+20

Recommended by96%of homeowners
Avatar for Arizona Southwest Solar & Electric LLC
Arizona Southwest Solar & Electric LLC
5.0(
4
)
Electric Vehicle Charging Station InstallationElectric Vehicle Charging Station Installation - For BusinessElectric Vehicle Charging Station Installation - For Business - Materials Not Provided+10 more

Serving Patagonia, AZ and surrounding areas

In business since 2018

Free estimates

Emergency services offered

"I absolutely could NOT be happier!! Josh and Mike arrived, after hours, and busted their tails to find the issue with my electrical issue. They narrowed it down but could not locate the exact location. Shane came out and helped them locate the problem, fixed it and restored order to my house. The awesome response, professionalism and dedication they all displayed was actually heartwarming. It's so good to know there are still companies around that will provide outstanding customer service and dedication without trying to break your bank account. The three technicians who came out were very knowledgeable, considerate, and extremely well-mannered. My wife and I are EXTREMELY impressed and very grateful. This company will always be my go-to place for my electrical needs!!! Shane, Josh and Mike, YOU ROCK!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+13

Recommended by100%of homeowners
Showing 1-10 of 39
Electrical questions, answered by experts

The Occupational Safety and Home Administration (OSHA) requires an electrical panel to have a minimum of three feet (36 inches) of room from the front of the panel to the closest obstacle. In this case, the word obstacle refers to nearly everything, including walls, machines, and other fixed objects. Additionally, panels require at least 6½ feet of headroom in the area directly in front of the fixture. These requirements help ensure safe use of the panel and allow electricians plenty of room to work.

Many ceiling fan-rated electrical boxes tend to be made of metal. However, some electrical boxes may also be made of heavy-duty plastic that is reinforced with metal support structures. It may also have an attachment that connects directly to a ceiling joist. If you are ever ensure, consult with a licensed professional to get their insight on best practices and whether the installation is a safe one.

No, you should always use proper electrical wire caps to safely cap off electrical wires. Electrical tape isn’t as durable as electrical caps and can deteriorate and separate over time, exposing the live wires. The only way to use electrical tape for this project is to wrap it around the caps themselves to reinforce them and create an even stronger connection, preventing an electrical emergency.

The color of your cable will help you to identify its function. In the U.S., the National Electrical Code (NEC) designates the color code for electrical cables. “Hot” cables are black, red, and blue. In cases of higher voltage lines, orange might also be used to indicate a hot cable. White or gray indicates a neutral, and green or green with a yellow stripe indicates a ground.

The most common reason a GFCI outlet would trip even when nothing is plugged in is if there’s a problem at the circuit breaker end. This could be an overloaded circuit, with too many appliances plugged into it, or another type of fault. If a GFCI outlet keeps tripping, it can also be because it is faulty and needs replacing.

The Patagonia, AZ homeowners’ guide to electrical services

From average costs to expert advice, get all the answers you need to get your job done.