"My original was to replace the hinges and hasp on the old outdoor access door for my water heater. I was convinced due to the condition of my old weathered door. I would be better served by a new Crafted door. The next day the handyman arrived on time. With the materials needed crafted and installed a new access door. 2 hours 300 dollars. I am very pleased with the workmanship."
"Vortex Filtration Inc is a excellent company with vast experience & knowledge in conditioning potable well water. I recommend Vortex Filtration Inc to design build and install their patented Vortex water system to solved all well water conditioning issues. My client had a problem for over tens years prior to the installation of the Vortex system. Once installed, the well water in the holding tank was crystal clear. Thanks Vortex!"
"Called in claim on 6/18; tech assigned on 6 /19; so far so good. Claim was for failed well pump with NO water to my home with two disabled seniors. Due to heavy workload and no extra pay on weekends the tech came for diagnostics 4 days later. He verified the failed pump and tried to purchase one at Home Depot. None in stock, had to be ordered. Pump came in on 6/30 and tech arrived today, 7/1, and expertly installed the new pump. Choice has a $ 500 limit on well repair, which is 1/3 of a typical bill. That dollar cap is riduculous. On a positive note, C-Force provides expert work for Choice and would be my choice for any future work."
"Called AHS....who sent service request to AAA Flexible Pipe. Adam came out quickly and installed new pump just before HEAVY rains hit...Fast and efficient service from AHS and AAA FLEXIBLE PIPE CLEANING."
2012 Maricopa Business of the Year. Arizona's premier home inspection company. Thermal imaging certified, no extra charges for pools. Statewide service. We schedule termite Inspections as part of our Inspections. A Rated BBB. 6 month warranty included with every inspection. 7 day per week service. \nwww.arizonainspections.com\nOffice 520-208-2590
At Plymwr Plumbing, we’re your neighbors first and your plumbers second. As a veteran-owned and operated company, we bring the same values of honesty, service, and respect to every home we walk into—especially when serving our veterans, seniors, and first responders.\n\nWe keep our overhead low so we can keep our prices fair. No games, no upselling, no nonsense—just reliable, affordable plumbing from people who genuinely care. Proudly serving Arizona and Southern California, we’re here to treat you the way a good neighbor should.
Sump Pump Installation questions, answered by experts
Most sump pumps come with power cords that can be plugged into an outlet, but there are options that can be hardwired into a home’s electrical system. Either way, it’s smart to have a backup power supply in case the electricity goes out during a storm. That way, the sump pump can keep running and removing water from the sump pit.
A small sump pump running infrequently uses an average of 10 kilowatt-hours (kWh) of electricity per month. The average cost for electricity is $0.171 per kWh. The size and use frequency affect how much electricity it uses. Sump pumps average one-third to one horsepower (hp) motors. One hp is equal to 745.7 watts. Watts multiplied by the time your pump is running divided by 1,000 equals your average kWh. Multiply kWh by your average cost of electricity. In areas with high rain or a marsh basin, the average cost can be as high as $15-$25 a month.
A sewage ejector pump is necessary if you have any plumbing fixtures, such as a bathroom, laundry room, or sink, located below the level of your home's main sewer line. Standard plumbing relies on gravity to drain wastewater and solid waste into the municipal sewer system or a septic tank. For fixtures below this level, like those in a basement, gravity cannot move the waste upward. The ejector pump provides the force needed to pump the sewage up to the main line. Without one, wastewater from below-ground fixtures would back up, potentially causing a sewage overflow and flooding. If all of your plumbing is on the main floor or higher, gravity is sufficient and an ejector pump is not needed.
Costs range from $300 to $1,200, depending on the pump type, issue, and installation complexity.
To maintain your sump pump, start by checking it every three to four months to ensure it’s in working order. Clear any debris from the pit because blockages can prevent the pump from operating efficiently. You should also test the pump by pouring a bucket of water into the pit. If it turns on automatically and drains the water, it’s functioning correctly. Inspect the discharge line for clogs, and ensure it directs water away from your home. Once a year, clean the pump itself, and consider having it professionally serviced for optimal performance.
The Meadview, AZ homeowners’ guide to sump pump installation services
From average costs to expert advice, get all the answers you need to get your job done.
Sump pump replacement costs depend on the type of unit you have and the cost of labor, which varies by region. Read on to find out more about what to expect.
Sump pump battery backup costs depend on the type and the design of the system purchased. Follow this guide to learn how to budget for your backup battery.
Sump pump discharge lines come in a couple of diameters and a range of lengths. Here’s how to determine the right sump pump pipe size for your installation.
