Top-rated carpenters.

Get matched with top carpenters in Coolidge, AZ

Enter your zip and get matched with up to 5 pros

Need a pro for your carpentry project in Coolidge, AZ?

Select your specific project to find the pro for you.

TRUSTED BY COOLIDGE, AZ HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon28
    Verified carpentry services reviews

Find Carpenters in Coolidge

Avatar for Skill Set Handyman Services
Skill Set Handyman Services
4.8(
74
)
Window Frame - RepairWindow Frame - Repair - For Business

Serving Coolidge, AZ and surrounding areas

Approved

Super Service Award Winner

In business since 2002

Free estimates

Warranties offered

"We had several towel rails that needed to be fixed as they had become loose over the years. Pablo from Skillset came out and was able to fix them right then. He was very efficient and pleasant to have around and we were very pleased with the result. The job was completed at a very reasonable cost and we would definitely hire again."
On a budget?
Adding space to your home
Commercial and residencial remodel
Response time1 day
12 neighbors recently requested a quote
Recommended by82%of homeowners
Sav-on Home Improvement
3.3(
211
)
Wood Stairs and Railings - Repair

Serving Coolidge, AZ and surrounding areas

Approved

In business since 1982

Free estimates

Emergency services offered

"Edit: After seeing my review, SavOn sent a team to come back and fix all of the issues. The window has been sealed, the trim has been properly attached, and the areas have been repainted. We are now 100% happy with the results. We needed some pieces of siding repaired or replaced. After reviewing several bids, we went with Sav On. They came by a few days later on 8/25 and tore out the old siding and wood, leaving the remnants next to the side of the house. After they took it down, they went around to try to find it at a local retailer. It had to be special ordered. On 8/31, they were back they were back to install the siding. They only did the section by our bathroom window and were here for a max of 2 hours. Siding around and under the guest bathroom window was removed and replaced on 9/1. We could hear the nail gun going off and were glad that the plastic would be removed. A light bulb in bathroom was broken due to vibrations from the nail gun. When I heard the glass break, I ran upstairs and the guy installing was surprised to see me. The window had been removed for some reason that I still don't understand. He didn't think anyone was home, but he did apologize for the lightbulb. When it was quiet for an extended period, I went back upstairs to see if the window had been replaced. That is when I noticed that it was set incorrectly, very off center, and one of the glass panels was cracked. The window sill was extremely dirty and there was chipped paint everywhere. There was also a nail protruding from the top of the window. I sent an email to Ivan telling him this was completely unacceptable. On 9/2, a crew showed up to do the texturing, I told them not to do anything before Ivan came to see the damage. He showed up a few minutes later to inspect and said they would take care of it. A guy from their fix-it crew called me the following day to schedule a time to come take a look at what they needed to do to make it better. They showed up on 9/4 to reset the window, remove the nail, seal, and paint the sill. Taylor called to say someone would be over on Friday 9/11 to do an estimate for the glass. That guy came and went in just a few minutes, which was nice, but we were still in limbo about what was next. Taylor called me on 9/15 saying that the glass would be replaced on the 16th. The tech came and went pretty quickly and we had a fresh panel of glass. I got up the following Saturday, 9/19, and heard commotion outside the bathroom window. A team had stopped by to do the texturing. We are now a month and a day out from when the estimate was signed. 9/21, Ivan called asking if we had any paint that matched. We had told him twice already that we did not have any. They came by, got a sample from the removed pieces, and were back later that day to paint. 9/22, we received a notice from our HOA regarding construction garbage next to our house. I sent yet another email to Ivan asking that they please remove it all. He returned with another guy 9/23 to remove all the junk and do some touch up painting. When they thought they were done, Ivan said to me, It looks pretty good, does it not?* I asked him about all the staples from the plastic sheeting that were still in the accent wood. He looked to the guy standing next to him and asked why there were so many. Anyway, they said they would remove them. I also pointed out all the visible holes from where the nails were put in, he said they would take care of those. They only took care of the ones that can be seen from the front of the house. The staples were removed and we can not really see where they were, holes are still visible on the left and right sides of accent wood, and on the framing by the roof where they replaced the vertical pieces. Paint is streaking and wood is not flush to the house. Buyer Beware."
grey hawk shower
val vista lakes shower
Response time9 hrs
22 neighbors recently requested a quote
Recommended by80%of homeowners
Avatar for Sentri Homes
Sentri Homes
2.8(
36
)
Carpentry Framing - Install

Serving Coolidge, AZ and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."
25 neighbors recently requested a quote
Berger's Table Pad Factory
4.8(
1,345
)
Arbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - InstallCarpentry Framing - Repair+10 more

Serving Coolidge, AZ and surrounding areas

In business since 1983

Free estimates

Credit card accepted

"After purchasing an Angie's List Deal, I received the measuring kit in the mail promptly. The template and instructions provided to draw my split table top and each of the leaves were easy to use and understand. I mailed the completed materials and received the table pads very quickly. The table splits in the middle to allow insertion of up to 3 additional leaves. The table also has 2 drop leaves. That's 7 pads. All fit perfectly. I have used them on the table for family parties (not every day) and they're durable and built to last. I keep them in the box they arrived in to protect them when not in use. These are a worthwhile investment."
Recommended by93%of homeowners
...
Showing 1-10 of 173
Carpentry questions, answered by experts

Bump-out additions can add some space to a closet without requiring any significant structural work. This entails pushing back the existing rear or side of the closet, simply moving the wall into either an adjacent room or unused space. For ground-floor closets, this could even be extended to the exterior of the home, but that has its own complications. Bump-outs are a good discussion to have with your contractor if you’re just looking to increase the space a little—not renovate the entire closet space.

Installing a tongue-and-groove wall requires similar techniques to those associated with installing shiplap. However, because of the precision necessary to make each board fit perfectly and the increased material prices, the cost is higher than that of shiplap installations. Expect to spend between $2 and $6 more per square foot for tongue-and-groove walls versus shiplap ones.

One of the most common house framing basics for decades has been using wood for the framing work. However, some framing contractors now suggest using steel frames. Steel is lightweight, resistant to fire, and resistant to moisture, all of which are areas where wood framing could cause problems. However, steel framing is more expensive than wood and limits your ability to insulate the home.

An A-frame home can be cheaper to build than a traditional house, but that is not always a given. Prices can be fairly similar in some cases, depending on the location, design, and necessary site preparation. Costs for an A-frame typically run between $100 to $200 per square foot, which is comparable to the cost of a traditional home. The cost of an A-frame can come in under those numbers if you opt for a prefabricated kit.

Removing a load-bearing wall is best handled by professionals. However, if you have the skill set and decide to DIY the project, you will still need at least one additional person to assist you. Aside from helping with demolition, you'll need another hand to install the new support beam.

The Coolidge, AZ homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.