Get matched with top fireplace pros in De Queen, AR

For most brick cleaning jobs, including fireplace bricks, use a masonry sponge and a gentle cleaner. A simple solution of equal parts water and vinegar, or a few drops of dish soap in a bowl of water, can effectively remove grime. For tougher stains, you can use a dedicated masonry or fireplace cleaner. It is crucial to wet the bricks thoroughly with water before applying any cleaning solution to prevent the brick from absorbing it, and to rinse the surface completely afterward. Harsher cleaners containing bleach or ammonia should only be used as a last resort, and they should never be mixed together.

Compared to certain types of firewood like pine or spruce—which burn off sticky resin contained within the wood that creates lots of smoke—elm isn’t the worst option for burning in a fireplace.

Because elm wood is dense, it burns at a moderate pace and does a pretty good job of keeping your home warm. Hardwood like maple or oak may perform slightly better, but elm isn’t a bad choice overall.

The time required for a chimney inspection depends on the inspection level. A Level 1 inspection typically takes between 45 minutes and two hours, with an average of about an hour and a half. A Level 2 inspection usually takes less than two hours. A more in-depth Level 3 inspection can take up to five hours, or even multiple days if it requires removing materials. The total duration also depends on the chimney's size, condition, and how long it has been since its last inspection; chimneys with severe damage will require a longer inspection.

You can control the flame on a pellet stove by using a damper, often located on the back of the pellet stove. While the damper function varies by model, you can open the damper slightly to let in more air or close it slightly to provide less oxygen, with the ultimate goal of providing a steady flame.