Get matched with top asphalt driveway pros in East Brewton, AL

Asphalt and concrete have their pros and cons, but it really depends on your priorities. If you’re looking for durability, concrete’s your best bet, lasting up to 50 years with minimal upkeep. Asphalt, on the other hand, needs more TLC with regular resealing but is cheaper to install and easier to repair. Concrete also wins in curb appeal and resale value, offering homeowners more customization. But if you’re looking for quicker, more affordable installation, asphalt has the advantage. Ultimately, your decision should align with your budget, willingness for maintenance, and design preferences.

Yes, recycled asphalt driveway costs can be substantially lower than new asphalt. With new asphalt costing between $90 and $190 per ton, this option can cost as much as 10 times more than laying down asphalt millings.

The answer to whether or not you need to get a permit before you start your driveway can vary widely based on local ordinances and the scope of your driveway ideas. In most urban and suburban areas, a permit is needed before building a new driveway to ensure that a homeowner is using safe materials and proper drainage practices while designing and constructing a new driveway. In some rural areas, a homeowner may not be required to apply for a permit. When building a new driveway on your own, always check with your local building department to see if you need to request a permit. When hiring a driveway contractor, verify that the right permits are being used before driveway construction begins.

Driveways should be sloped with a minimum 2% slope—anything lower will cause precipitation and runoff to collect. A 2% slope is the equivalent of a 2-foot rise over 100 feet. One quick way to check the integrity of your driveway’s slope: no more than four inches of water should collect on the surface longer than 15 minutes after rain.