Renting temporary fencing will protect your property during construction or even a party. Fence type, material, and security features impact the cost.
How Much Does a Redwood Fence Cost to Install? [2025 Data]
Normal Range: $1,800 - $10,500
The average cost to install a redwood fence is $6,300 for 200 feet of fence. Small yards with minimal fencing required might cost as little as $900, but prices for redwood fencing can reach $12,250 for big yards.
How we get this data
Photo: chuckcollier / istock / Getty Images
Photo: chuckcollier / istock / Getty Images
Highlights
Materials account for $8 to $20 per linear foot, and labor accounts for $10 to $15 per linear foot of the total project cost.
You’ll pay $20 to $60 for a fence permit if your area requires one.
You need to stain and seal your fence to keep the wood in good condition, which adds $3.50 to $13 per linear foot to the cost.
Redwood fences are durable, low-maintenance, and attractive, but they’re also among the more expensive types of wood fences. On average, a homeowner will spend $6,300 to have 200 feet of redwood fence professionally installed, though redwood fence costs might range from $900 to $12,250.
Redwood Fence Materials Cost
Photo: richard johnson / istock / Getty Images
The type of wood you select for a fence can greatly impact the overall cost, and redwood tends to be on the more expensive side. Expect to spend between $8 and $20 per linear foot just for fencing materials. The higher end of the range accounts for more expensive components, such as posts, post caps, and gates.
Fence Installer Cost
While it’s possible to install a redwood fence yourself, it’s lengthy and back-breaking work. For a successful and stress-free installation, we recommend finding a highly-rated fence installer near you.
Of course, this comes with a cost. The labor cost for redwood fence installation runs between $10 and $15 per linear foot.
| Cost Factor | Cost Range |
|---|---|
| Redwood materials | $8–$20 per linear foot |
| Labor to install | $10–$15 per linear foot |
| Total Cost | $18–$35 per linear foot |
Before you read more: Get inspired by these real pro projects
Size of Redwood Fence
Given that both material and labor costs for a redwood fence vary by the total linear footage of the structure, the size of your yard (measured as the perimeter that you’re fencing, minus any existing barriers, such as the side of your home) has a huge impact on how much you’ll spend on a redwood fence.
The table below shows costs ranging from $900 to $12,250 depending on fence perimeter.
| Perimeter of Redwood Fence | Cost Range to Install |
|---|---|
| 50 | $900–$1,750 |
| 75 | $1,350–$2,625 |
| 100 | $1,800–$3,500 |
| 150 | $2,700–$5,250 |
| 200 | $3,600–$7,000 |
| 250 | $4,500–$8,750 |
| 300 | $5,400–$10,500 |
| 325 | $5,850–$11,375 |
| 350 | $6,300–$12,250 |
Additional Redwood Fence Cost Factors
Photo: victorass88 / i stock / Getty Images
Other factors can impact the overall cost to install a wood fence, including:
Permits
In general, you’ll almost always need a permit to build a fence. The cost will vary depending on your municipality, but permit prices can range from $20 to $60. Often, the permit fee is included in the professional fence installer’s quote, but always ask to confirm.
Location
Where you live can also impact both material costs and labor costs. In general, areas with a higher cost of living yield higher labor costs. Redwood is native to California and Oregon, so material costs may be lower if you live nearby.
Gates and Other Features
The higher end of our materials cost range ($20 per linear foot) accounts for posts and the occasional gate. That said, if your fence requires multiple points of entry, your costs could go up even more. You’ll also pay more for post caps, and you may need concrete for post bases.
Angi Tip
Fence gates are heavy and cumbersome to install. It’s all too easy to make a small mistake and ruin the integrity of your fence during a DIY installation. Hire a fencing pro to ensure a sturdy installation done right.
Removing an Existing Fence
If your yard is currently fenced and you’re planning to replace it, you’ll either need to remove it yourself or budget for the cost of fence removal. The same contractor installing your new fence can likely remove the existing one. Costs range from $300 to $750 on average, though you may spend up to $3,100 for a larger fence.
Land Leveling and Landscaping
If your yard is sloped, installing a fence is more difficult and might require additional materials and cuts. Otherwise, you’ll need to budget around $2,200—that’s the average cost to level a yard.
Similarly, a redwood fence may be part of a larger landscaping project. Whether you’re planting new trees, installing pavers, or replanting your grass, you’ll need to budget for larger landscaping costs.
Working Around Underground Utilities
Before work begins, always call DigSafe (811 in most states) to make sure there aren’t any underground utilities that will complicate fence installation. If there are, your labor and material costs could change as the pro needs to work around existing utility lines.
Staining and Sealing
While you likely don’t want to paint your redwood fence, you should absolutely stain and seal it to protect it against the elements. This will add anywhere from $3.50 to $13 per linear foot to your overall costs. Here’s how to stain a fence, if you want to tackle this portion on your own.
Why You Should Hire a Fence Installation Pro
While you can save around half the total cost of installing a redwood fence by DIYing it, it’s best to hire a fence installation pro near you unless you already have the experience and equipment for this project. An improperly installed fence can be prone to rot and other damage and may not last as long as a professionally installed fence.
Here’s why it’s ideal to hire a fence installation pro
Installing a redwood fence is a big job—here’s why you should hire a pro:
A fencing pro has the necessary equipment to dig post holes and properly secure posts.
Fencing professionals can assess what land prep is needed to get your property fence-ready.
A pro will ensure your fence is level and flush for the best-looking results.
Local fencing pros are familiar with the permit process and all applicable codes and regulations.
If you want to DIY redwood fence installation
While we recommend hiring a pro for this project, there are some things you can do to help the installation process:
Clear the fence line of brush, rocks, and other debris
Remove and dispose of the old fencing material
Locate and mark underground utilities
Stain and seal the fence after installation
Install landscaping features once the fence is installed
Tips to Reduce the Cost of a Redwood Fence
Looking for ways to keep the cost of a redwood fence down? Here are a few tips to consider:
Install it yourself: We highly recommend working with a pro on such a big project, but if you’re an experienced DIYer, you can cut off about half the project cost by installing it yourself.
Stain and seal yourself: Even if you don’t want to install the fence yourself, you can save some money by staining and sealing it after the contractor is done.
Fence in a smaller portion of your yard: Size is the biggest factor affecting the cost of your fence. Reduce the portion of the yard you’re fencing to lower the price and take advantage of the side of your home to reduce your material costs.
Does a Redwood Fence Increase Home Value?
While fences may not increase the value of your home as far as an appraiser is concerned, they may be a huge way to attract offers from potential buyers, particularly those with kids or pets. By choosing a high-quality material such as redwood, you ensure your fence has mass curb appeal.
Next Steps: Finalize Your Project With a Pro
A fencing pro will take exact measurements, but knowing a rough estimate of the fence length will help you budget for this project.
Decide in advance how many gates you want and where they’ll be located.
Find out if staining and sealing are included in your project estimate.
Ask the pro if a permit is required and who is responsible for pulling it.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
Frequently Asked Questions
The homeowners guide to fencing services
From average costs to expert advice, get all the answers you need to get your job done.
Looking for that rustic charm only a split rail fence can provide? Use this split rail fence cost guide to get an idea of what your fence will total.
Black fencing adds some elegance to your property while maintaining security. Use this black chain-link fence cost guide to get an estimate for your fencing.
This step-by-step guide will teach you how to tighten a sagging chain link fence. Improve your fence's appearance and protect your property.
Fence removal costs are highly variable, depending mainly on the size and type of fence. Read on and learn why labor will always be your biggest spend.
•Get the facts on the cost of invisible fence repair, including average prices, key cost factors, and tips to save. Learn what impacts your repair estimate and how to budget.