Get matched with top basement waterproofing pros in Node, WY

It’s not the number of weep holes that should be of concern to builders but rather their spacing. Weep holes are usually spaced anywhere between 16 inches on center when using round tubes or wicking materials and 24 inches on center when using open-head joints. This is a more conservative spacing than the 33-inch maximum spacing on center that’s mentioned in the International Residential Code. All in all, the total number of weep holes a brick exterior should have will depend on the size of the structure.

As the first layer of water protection for your roof deck and the building materials below, underlayment is designed to prevent water damage, so it’s okay if it gets wet. However, you shouldn’t rely solely on underlayment for protection. If rain interrupts your roof project and you have all of the underlayment down, you’ll likely be fine, but you should install shingles over that layer as soon as possible, as long-term exposure can lead to water damage.

“Basement waterproofing” sometimes refers to applying a waterproof sealant to basement walls, in which case you would use a waterproof paint, often made of latex. However, there are many methods you can use to waterproof a basement, including exterior drainage systems, interior drainage systems, dehumidifiers, and more. As such, the materials you use can vary depending on the methods you use.

Generally, moisture barrier padding costs $0.75 to $1.50 per square foot, varying by brand and mix. That’s a lot more than standard padding, which runs $0.25 to $0.90 per square foot. The price difference between these two options might seem steep, but think of it as insurance against future carpet replacement costs and subfloor damage. If you have pets or kids, that extra investment in high-risk areas like your living room often pays off.