Get matched with top fencing pros in Alpine, WY

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust. 

The ideal distance between fence posts depends on several factors, including the terrain, the purpose of the fence, and the material used. For different types of fences, here are some general guidelines:

• Wood and Metal Fences: Posts should be spaced between 5 and 8 feet apart.

• Vinyl Fences: Spacing can be between 6 and 8 feet.

• Chain-Link, Mesh, or Lattice Fences: Posts can be set anywhere from 4 to 25 feet apart, with 4-10 feet being common for chain-link.

• Wire Fences: Spacing can be up to 12 feet apart.

Yes, like other types of wood fencing, pressure-treated fence boards can warp. However, there are a few things you can do to reduce the likelihood of your fence warping. Sealing or staining your fence every few years, for example, can protect the wood against moisture, sun exposure, and temperature changes.

The best under-gate dog barrier is one that extends to the ground. This effectively keeps dogs in and won't give them room to squeeze through. However, dogs that dig can still get under the barrier. Deter digging by paving the ground beneath the gate or filling it in with rocks or gravel. Be careful using wire to extend dog gates, as the sharp ends may cut or hurt your dog's paws.