Get matched with top backsplash installation pros in Rowlesburg, WV

Per the International Code Council, walk-in shower floors should have a minimum slope of 1/4-inch per foot (or a 2% slope) towards the drain. The slope should be no steeper than 1/2-inch per foot (or a 4% slope). This helps safely direct water into the drain rather than all over your bathroom.

To make a small bathroom look bigger, choose light-colored tiles in a medium- to large-format size. Lighter colors like white, cream, or light gray help open up a room, making it feel larger and more airy. While it may seem counterintuitive, small tiles can actually make a bathroom look smaller because the increased number of grout lines creates a busy pattern that visually shrinks the space. Instead, opt for medium- or large-format tiles for a more seamless, expansive appearance. For the best effect, pair your tiles with a matching or similarly colored grout to create a continuous surface that enhances the illusion of a larger area. Avoid dark colors, heavy patterns, and contrasting grout, as these can make the space feel more confined.

If you’re handling your tile removal yourself, seal the room using painter’s tape and heavy-duty contractor bags to prevent dust and shards from escaping. Use a claw hammer or a pry bar and a mallet to get behind the tile and pry it away from the floor or wall. Once your tiles are all removed, sweep everything into contractor bags for disposal, being careful not to overfill them. Make sure you wear a dust mask, safety goggles, and work gloves to keep yourself safe from injury while you work.

Flooring transition strips can be secured to the subfloor using glue, nails, or screws. For a more secure installation, especially in high-traffic areas, using screws or nails is recommended as it reduces the risk of slippage. However, if aesthetic appeal is a priority, glue provides a cleaner, more seamless finish without any visible holes or screw heads.