Get matched with top fencing pros in Withee, WI

To choose where to add a fence gate, know where fence gates shouldn’t go. For example, you should avoid placing gates over low spots on the ground where water can collect and form muddy puddles. Many ranchers install gates at the corner of a fence. Certain gate placements may also be required depending on the type of gate latch you use.

Maintain your wattle fence by inspecting it at least twice per year for loose weaving and degrading branches. Replace any seriously degraded sections, ensure water drains properly around the posts, and trim any sprouting branches if you used green wood. If you notice the weave loosening, you can often tighten it by gently pushing down on the top branches. You can also apply a natural wood preservative every two to three years to extend the fence's lifespan.

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

The most common height of a front yard fence is around 3 feet high, but it can vary depending on your zoning laws. If your fence is meant to create privacy, something closer to 6 feet or higher will do the trick. Most of the time, the highest fence you’ll see is 8 feet tall.