Top-rated fencing pros.

Get matched with top fencing pros in Poplar, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your fencing service project in Poplar, WI?

Select your specific project to find the pro for you.

Find Fencing pros in Poplar

Avatar for Marvin's Brick Pavers
Marvin's Brick Pavers
4.2(
40
)

Serving Poplar, WI and surrounding areas

Approved

In business since 1997

Free estimates

Warranties offered

"The project went very well! Marvin gave us a solid quote under $4000 that included a return visit in July to apply a seal coat over the patio. The crew came in mid April and completed the project in 2 days. The work was done in a way that did not damage our existing grass and/or beds. In fact they included moving one our beds in the final cost. We continue to be very pleased with Marvin and his courteous, knowledgeable crew. We highly recommend Marvin Pavers!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+44

6 neighbors recently requested a quote
Recommended by77%of homeowners
Fencing questions, answered by experts

If you hire a fence installer for the project, the time it takes to build a fence is about 20 to 30 hours. Tackling the project yourself will take around 40 to 50 hours. It can take longer if you need to obtain permits, level the ground, remove the old fence, or remove a tree.

Yes, installing wrought iron fencing will usually require a building permit, as do all types of fencing. Building permits for wrought iron fencing typically cost between $150 and $500, and the price will vary based on where you live and how much your local building department charges. You may also need to pay for a property survey if you’re installing wrought iron fencing on your property line. This type of survey can cost around $500, but it prevents issues with building on neighboring properties, which can be much more expensive in the long run.

Knowing how close to the property line you can build a fence is an important planning step in your fence installation project. In many U.S. states, you are allowed to build a fence directly on the property line as long as your neighbor signs off on the plan. But check with your state government because some states and municipalities require a couple of inches before your property line.

There is no best color for a vinyl fence, as it truly depends on a homeowner’s aesthetic preference. Classic white is the most popular and widely available of all the vinyl fence colors. However, contemporary black, warm browns, and natural grays are becoming more mainstream. One perk of darker-colored fences is that they are easier to “keep clean,” as in, dirt and debris don’t show up as easily as they would on lighter-colored fences. So if you don’t plan to give your fence regular washings, a dark color like black, gray, or brown would be the best choice.

The bottom strand should sit between 12 to 15 inches from the ground. If you have a problem with small critters, you can aim for 8 inches. Three-strand fences should be 16 to 19 inches apart, four-strand fences should be 10 to 12 inches apart, and five-strand fences should be 8 and 10 inches apart.

The Poplar, WI homeowners’ guide to fencing services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"